We have collected the most relevant information on Frequency Response Audio Tape. Open the URLs, which are collected below, and you will find all the info you are interested in.
Frequency response of cassette - Hydrogenaudio
https://hydrogenaud.io/index.php?topic=13651.0#:~:text=Frequency%20response%20of%20cassette%20Reply%20%232%20%E2%80%93%202003-09-28,encoders%20are%20most%20tuned%20at%20that%20sampling%20frequency.
Tape speed, track width, frequency response, and …
https://richardhess.com/notes/2007/08/26/tape-speed-track-width-frequency-response-and-dynamic-range/
This too is related to the ratio of the wavelength to the length of the tape pole pieces and the tape contact with the pole pieces. Generally, 30 in/s low frequency reproduction is inferior to 15 in/s low frequency reproduction. Higher speeds also average out the irregularities in the tape better than lower speeds.
Tape Frequency response comparisons between several tape ...
https://reeltoreeltech.com/tape-frequency-response-comparisons-between-several-tape-brands/
The ATR MasterTape shows a flat frequency response +/- 2db from about 60Hz to 20Khz at 7 ½ IPS, and about 40Hz to 22Khz at 15 IPS. That is pretty typical for an Otari 5050 deck with a high quality tape. Next up, we have the ATR MDS-36 tape. This is 1 mil tape, with 1800’ on a 7” reel, or 3600’ on a 10.5” reel.
Measuring the frequency response of tape playback ...
https://www.whatsbestforum.com/threads/measuring-the-frequency-response-of-tape-playback-electronics.24625/
Jan 2, 2018. #1. For an end user of a tape repro electronics to do this, we'll assume the use of a reproducer alignment tape, a so-called calibration tape. Yet a limitation with the popular cal tapes is the too sparse distribution of frequencies. So, if you were a qualified designer of tape electronics (or someone seriously wanting to investigate the performance of any tape …
media_2: analog tape characteristics
https://tangible-technology.com/media/media_2.html
COOKING WITH ANALOG TAPE. Unlike digital storage media, analog tape's frequency response is not flat. Tape speed and track width will greatly affect the response at both ends of the audio spectrum. For a perfect example, check out Figure One which is a frequency response chart that shows the performance variables of a Studer B67. This is a quarter-inch two track — with new …
Typical frequency range of a cassette tape - Ars Technica ...
https://arstechnica.com/civis/viewtopic.php?t=848978
Not to mention things like tape speeds (freq. response changes with tape speed), bias settings (how much you overbias), and types of tape (499, 456, GP9, etc). quote:
Now you know Frequency Response Audio Tape
Now that you know Frequency Response Audio Tape, we suggest that you familiarize yourself with information on similar questions.
