We have collected the most relevant information on Genelec 1031a Vs Dynaudio. Open the URLs, which are collected below, and you will find all the info you are interested in.
Dynaudio vs Genelec... No, it's not an easy question ...
https://www.audiosciencereview.com/forum/index.php?threads/dynaudio-vs-genelec-no-its-not-an-easy-question.25147/
Amir's measurements of LYD 5 confirmed that the specs were mostly correct, so I trust Dynaudio on this. G Four specs are ±2.5 dB (48 Hz - 20 kHz). I also trust Genelec, and according to specs, G Four are a bit better, but not that much. I would say, they are probably not significantly better.
Genelec 1032A's vs. Dynaudio BM15A's? - Avid Pro Audio ...
https://duc.avid.com/showthread.php?t=90166
IMHO...... go with the DynAudio BM15s. I have owned both each for about a year. First the genelec then the BM15A. The Dyns really had a silky top end and a good punchy low end. Mixes translated well. But, If you have the budget, Check Out the M & K 2310P. THX cert. Kick Butt Monitors. I love them. Just my 2 cents. jai www.themixstudio.com
Genelec vs Dynaudio (pro advise) - Gearspace.com
https://gearspace.com/board/high-end/192944-genelec-vs-dynaudio-pro-advise.html
The Genelecs were giving a bit more booming sound in the low frequencies. Off course the choice it is allways depending on what type of music you record and personal taste. Also other things like room and outboard will influence the sound. Greetz, Paul Share Reply Quote 22nd April 2008 | Show parent # 6 tamasdragon Lives for gear 🎧 15 years
Best monitors under and around $4k/pair??? Upgrading …
https://gearspace.com/board/so-much-gear-so-little-time/141367-best-monitors-under-around-4k-pair-upgrading-my-genelec-1031as.html
Upgrading my Genelec 1031A's. Hey guys I'm looking for the best monitors under and around $4,000 a pair to replace my genelec 1031A's any thoughts? So far I'm leaning towards the dynaudio air15's.
1031A - Genelec.com
https://www.genelec.com/previous-models/1031a
The Genelec 1031A is a two-way active monitor system, consisting of a vented enclosure with a multiple amplifier unit set into the back. The amplifier unit contains a low signal level active crossover, two power amplifiers and overload protection for each driver. This design provides high output, low coloration and broad bandwidth.
7 Studio Monitors For Audio Post Production Tested - Part ...
https://www.pro-tools-expert.com/production-expert-1/2020/4/14/home-studio-speaker-shootout-for-audio-post-production-part-2
Genelec vs Dynaudio Core 7. Genelecs were bassier. Core had better distinction and clarity in Can song. Genelecs handled the bass and punches in the fight scene – Core distorted on these so I would need to change settings. Both nice on solo voice – Genelecs sounded more like Phil. Genelecs crisper fx and foley on the fight scene. Winner ...
The Best Professional Nearfield Studio Monitors for Under ...
https://sonicscoop.com/2021/10/14/the-best-professional-nearfield-studio-monitors-for-under-2000-each/
Somewhat like Genelec, Dynaudio is developing monitors that can move around with ease and gain the trust of the engineers that rely on them. Out of the box, this one is the tallest, the biggest and the heaviest of the bunch, with the most heat sinks, the most buttons and input options, and the most power.
Genelec 1031a vs LX521 | Audio Science Review (ASR) …
https://www.audiosciencereview.com/forum/index.php?threads/genelec-1031a-vs-lx521.23996/
Jun 6, 2021 #2 I've used the 1031s in the past and liked them albeit as a nearfield monitor. This is the 1031A from Genelec's datasheet which has thus far matched other measurements quite closely. As such you can see it's pretty flat and probably has a slightly less down-sloping PIR than more modern Genelecs.
Now you know Genelec 1031a Vs Dynaudio
Now that you know Genelec 1031a Vs Dynaudio, we suggest that you familiarize yourself with information on similar questions.
