We have collected the most relevant information on Good Settings For Universal Audio 6176. Open the URLs, which are collected below, and you will find all the info you are interested in.


Springing Forward With UA Hardware | Universal Audio

    https://www.uaudio.com/blog/springing-forward-ua-hardware/#:~:text=For%20the%20LA-610%2C%20set%20the%20Meter%20knob%20to,showing%20us%20the%20levels%20of%20the%20preamp%20stage.
    none

Model 6176 Channel Strip - Universal Audio

    http://media.uaudio.com/assetlibrary/6/1/6176_manual.pdf
    Experiment with differing degrees of preamp Gain and Level to hear the various amounts of coloration the 6176 can impart to your signal. For the cleanest, most uncolored signal, set the Gain switch to its lowest usable setting with Level set between 7 and 10.

Universal Audio 6176 presets : Recording live or studio

    https://recording.org/forum/recording-live-or-studio/universal-audio-6176-presets
    But regardless of the mic, I have found two settings I like best for the 6176. For the most transparent sound, I use (on the mic-res side) 2000ohm impedence, -5 gain input, volume at 9-9.5, -3db at 10khz, -1.5db at 100khz... and on the 1176 side I use a #6 attack, #5 release, #5 input, #7 output, 4:1 ratio with gain reducing pretty consistent at 3-5 db.

Sharing my 1176/6176 settings for pop vocals - …

    https://gearspace.com/board/so-much-gear-so-little-time/564838-sharing-my-1176-6176-settings-pop-vocals.html
    Somebody mentioned years ago about Johnny Cash "settings" from album produced by Rick Rubin and I found that pretty cool sounding. I usually link two 1176's together. First one is 8:1 with fastest attack & fastest release and the second one gives edge to vocals 12:1 with attack at 1 o'clock and release at 2 o'clock.

UNIVERSAL AUDIO 6176...How does it compare? - …

    https://gearspace.com/board/so-much-gear-so-little-time/524511-universal-audio-6176-how-does-compare.html
    the 6176 has a nice fat warm sound when you dial in the settings right. Make sure to check the metering on the pre amp and the compressor. The low impedance option is usefull and of course the 1176 side of it is always going to be useful with all kinds of pre amps.

Now you know Good Settings For Universal Audio 6176

Now that you know Good Settings For Universal Audio 6176, we suggest that you familiarize yourself with information on similar questions.