We have collected the most relevant information on Hand Wound Audio Transformers. Open the URLs, which are collected below, and you will find all the info you are interested in.
Hand Wound Transformers - Nash Audio
http://www.nashaudio.com/handwound
Starting 1/8” from the edge of the coil I wound the first few turns by hand to get every thing started off correctly. Your turns should lay touching each other side by side as you wind. When your reach 1/8” from the end of the first layer, wrap that layer with a layer Kraft paper cut to the width of the existing coil form.
Merren Audio - Hand Made Audio Transformers
All products are designed and proudly hand-crafted in the USA to your specifications by musicians and electrical engineers. MERREN AUDIO provides custom wound transformers for both output and power applications including chokes. Wide bandwidth output transformers for Single Ended and Push-Pull vacuum tube applications.
Hand wound transformer question | diyAudio
https://www.diyaudio.com/community/threads/hand-wound-transformer-question.381481/
Hey guys, i'm preparing to build a ribbon microphone and i've decided on winding my own transformer. I've done the math and come up with the appropriate wire gauges and turn counts, and i will be using a smallish iron powder toroidal core, but i was wondering if anyone potentially has more knowledge when it comes to audio transformer construction.
"SILK" Hand wound Output Transformer - SAC Thailand
http://www.sacthailand.com/Transformer_SilkWinding.html
Silk Winding Technic. SACThailand is proudly present. "SILK" Hand wound Output Transformer. For Single Ended and Push-Pull Vacuum Tube Amplifier. Output Transformer plays the most significant roll in vacuum tube amplifier since its performance defines the limitation of the amplifier. The need of broad frequency response with continuous fluctuation of power level …
Hand wound transformer question | Page 2 | diyAudio
https://www.diyaudio.com/community/threads/hand-wound-transformer-question.381481/page-2
It depends. I once wound a 50 turns current transformer toroid for audio measurements - and used the material with highest permeabiltiy available, Nanoperm from Vacuumschmelze - achieving a low frequency cutoff in the ballpark of 20Hz. No way to come close with any ferrite here.
Hand winding custom output transformer - YouTube
https://www.youtube.com/watch?v=056TWuUW1Pg
One of my local customer request for custom- made 832 PP amplifier. This is the output transformer I made for 832 PP project. The output are double C core ty...
Now you know Hand Wound Audio Transformers
Now that you know Hand Wound Audio Transformers, we suggest that you familiarize yourself with information on similar questions.
