We have collected the most relevant information on Hdmi_Force_Edid_Audio=1 Raspbmc. Open the URLs, which are collected below, and you will find all the info you are interested in.
raspbmc - HDMI hisses when turned on before TV - Raspberry ...
https://raspberrypi.stackexchange.com/questions/7636/hdmi-hisses-when-turned-on-before-tv
You should probably be using the hdmi_force_edid_audio=1 option (assuming that your TV can decode DTS etc. coming in through the HDMI lead). If it doesn't then using hdmi_force_edid_audio=0 might help.
Raspbmc Audio Issue 2.0 to 5.1 - Raspberry Pi Forums
https://forums.raspberrypi.com/viewtopic.php?t=49232
Raspbmc Audio Issue 2.0 to 5.1. Sat Jul 06, 2013 6:23 pm . ... Also if I add any hdmi config to the config file my sound goes away where as before I had hdmi_force_edid_audio=1 in there to fix my low sound during normal conversation issue. masterluke Posts: 200 Joined: Tue Apr 17, 2012 4:10 pm.
'config.txt' tag wiki - Raspberry Pi Stack Exchange
https://raspberrypi.stackexchange.com/tags/config.txt/info
hdmi_force_hotplug=1 config_hdmi_boost=4 hdmi_group=1 hdmi_mode=1 disable_overscan=0 hdmi_ignore_edid. Enables the ignoring of EDID/display data. hdmi_ignore_edid=0xa5000080 hdmi_force_edid_audio. Pretends all audio formats are supported by display, allowing passthrough of DTS/AC3 even when not reported as supported. hdmi_force_edid_audio=1 ...
hdmi_force_hotplug=1? - Raspberry Pi - OSMC Forums
https://discourse.osmc.tv/t/hdmi-force-hotplug-1/739
I captured the EDID of the TV with the Pi plugged directly into the TVs HDMI port. I did this via the new settings and it has added it correctly to the config.tx but I noticed that it also adds hdmi_force_hotplug=1 which I though was no longer required. I have audio passthrough set with AC3 capable receiver.
7inch HDMI Display (H) - LCD wiki
http://www.lcdwiki.com/7inch_HDMI_Display_(H)
hdmi_force_edid_audio=1 max_usb_current=1 hdmi_force_hotplug=1 config_hdmi_boost=7 hdmi_group=2 hdmi_mode=87 hdmi_drive=2 display_rotate=0 hdmi_cvt 1024 600 60 6 0 0 0 Step 4. Insert SD card. After the above steps are completed, pop up the SD card on the computer and insert it into the SD card slot on the back of the raspberry pie. ...
What is HDMI EDID? Everything You Need to Know!
https://thehometheaterdiy.com/hdmi-edid/
My question relates to EDID as it concerns audio specs. I was hoping to extract audio from an HDMI output from a receiver (between the receiver and the monitor). The HDMI extractor will accept Linear PCM 5.1 or 7.1 but does not decode DTS or AC3. it would seem that I should be able to use a device like this to inform the receiver that this ...
Force HDMI to carry 5.1 Dolby or whatever - Windows 10 ...
https://www.tenforums.com/sound-audio/148247-force-hdmi-carry-5-1-dolby-whatever.html
The Nvidia card has a display port to HDMI adapter, which I use to connect to the HDMI audio extractor which sends the HDMI on to the HDTV. But all the sound it ever gets is stereo. I plug a fireTV stick into the HDMI splitter and I get 5.1 Dolby out of the sound coaxial port on both the splitter and the HDTV, so the hardware works.
Solved: Modify the EDID of LCD TV to enable HDMI audio ...
https://www.experts-exchange.com/questions/27738470/Modify-the-EDID-of-LCD-TV-to-enable-HDMI-audio.html
Modify the EDID of LCD TV to enable HDMI audio. I have a Soyo MT-SYTPT 4227ab LCD TV and a Toshiba Satellite A300 PSAG8C-048013 laptop (Windows 7). When I connect them via HDMI, my laptop's HDMI audio device is specified as "not plugged in" and the TV does not output audio. When I connect my laptop to other TVs, my laptop's HDMI audio device ...
Now you know Hdmi_Force_Edid_Audio=1 Raspbmc
Now that you know Hdmi_Force_Edid_Audio=1 Raspbmc, we suggest that you familiarize yourself with information on similar questions.
