We have collected the most relevant information on How To Configure Lync Audiocodes. Open the URLs, which are collected below, and you will find all the info you are interested in.
Configuration Note - AudioCodes
https://www.audiocodes.com/media/8038/ltrt-40127-lync-2013-audiocodes-enhanced-gateway-with-analog-devices-configuration-note.pdf
This document describes the installation and configuration of AudioCodes Mediant Gateway family as Enhanced Gateway with Analog Device deployed in the …
Configuration Guide - AudioCodes
https://www.audiocodes.com/media/10206/ltrt-33420-connecting-paetec-sip-trunking-service-to-microsoft-lync-via-mediant-800-1000-and-3000-e-sbc-gateways-configuration-note.pdf
This Configuration Guide describes a sample configuration scenario for a network that uses the AudioCodes Mediant 800 MSBG E-SBC, Mediant 1000 MSBG E–SBC or the Mediant 3000 E-SBC Media Gateway to facilitate a connection between Microsoft Lync 2010 and PATEC’s SIP Trunking Service, for superior voice quality services.
Configuration Note - AudioCodes
https://www.audiocodes.com/media/9660/ltrt-12412-mediant-e-sbc-for-twilio-sip-trunk-with-microsoft-lync-2013-configuration-note.pdf
Configuration Note 3. Configuring Lync Server 2013 Version 7.0 13 AudioCodes Mediant E -SBC 3 Configuring Lync Server 2013 This chapter describes how to configure Lync Server 201Microsoft 3 to operate with AudioCodes E-SBC. Note: Dial plans, voice policies, and PSTN usages are also necessary for Enterprise
Configuration Note - AudioCodes
https://www.audiocodes.com/media/8039/ltrt-40134-microsoft-lync-server-2013-enhanced-gateway-configuration-note.pdf
Configuration tab > VoIP menu > Network > IP Settings) and proceed to Section 3.1.1. b. For the Mediant 2000 and Mediant 3000 devices: ♦ Open the IP Settings page (Configuration tab > VoIP menu > Network > IP Interfaces Table ), as shown below: Figure 3-2: IP Settings Screen (Single Network Interface)
Configuration Note - AudioCodes
https://www.audiocodes.com/media/9654/ltrt-12320-mediant-e-sbc-for-netia-sip-trunk-with-microsoft-lync-2013-configuration-note-ver-68.pdf
Configuring Lync Server 2013 Version 6.8 13 AudioCodes Mediant E-SBC : 3 Configuring Lync Server 2013 : This chapter describes how to configure Lync Server 201Microsoft to operate with 3 AudioCodes E-SBC. Note: Dial plans, voice policies, and …
Microsoft Lync and Skype Manager SIP Trunk - …
https://www.audiocodes.com/media/10300/ltrt-41301-audiocodes-mediant-1000-msbg-with-microsoft-lync-and-skype-sip-trunk-configuration-note.pdf
This configuration note is intended for Installation Engineers or AudioCodes and Skype Partners who are installing and configuring the Skype SIP Trunking and Microsoft Lync Communication platform to place VoIP calls using the AudioCodes gateway. The AudioCodes Mediant 1000 MSBG device was used to implement this solution.
Configuration Note - AudioCodes
https://www.audiocodes.com/media/9651/ltrt-12245-mediant-e-sbc-for-bt-one-voice-sip-trunk-with-microsoft-lync-2013-configuration-note.pdf
Configuration Note Notices Microsoft Lync & BT One Voice SIP Trunk 5 AudioCodes Mediant E-SBC Notice This document describes how to connect the Microsoft Lync Server 2013 and BT One Voice SIP Trunk using AudioCodes Mediant E-SBC product series, which includes the Mediant 800
Connecting Microsoft Lync 2013 with SIP Trunk - …
https://www.audiocodes.com/media/8046/ltrt-54010-lync-2013-mediant-sbc-for-itsp-sip-trunking-configuration-note-ver-68.pdf
The Configuration Note is intended for or AudioCodes and Partners who are engineers responsible for installing and configuring SIP Trunking and Microsoft's Lync communication platform for enabling VoIP calls using AudioCodes' SBC.
My UC Thoughts: AudioCodes FXO to Lync Configuration
https://www.myucthoughts.com/2012/06/audiocodes-fxo-to-lync-configuration.html
The only additional configuration that was required was under "VoIP --> GW and IP to IP --> Analog Gateway --> FXO Settings" and under "VoIP --> GW and IP to IP --> Analog Gateway --> Automatic Dialing". FXO Settings. Change the "Dialing Mode" to One Stage. Automatic Dialling.
Lync 2013 PSTN Gateway Configuration with Audiocodes ...
https://social.technet.microsoft.com/Forums/lync/en-US/4bb17569-649e-415b-bd47-df88a12ddeb9/lync-2013-pstn-gateway-configuration-with-audiocodes-mediant-800-connected-to-toshiba-ipedge-for
First, you have to findout the settings for the trunk configuration between audiocodes and you IP-PBX. In a side by side configuration between your IP-PBX and Lync you will have different extensions on the IP-PBX and Lync but you can use simult. ringing or call forward from your main extension to use both endpoints.
Now you know How To Configure Lync Audiocodes
Now that you know How To Configure Lync Audiocodes, we suggest that you familiarize yourself with information on similar questions.
