We have collected the most relevant information on How To Connect Cd-Rom Audio Cable. Open the URLs, which are collected below, and you will find all the info you are interested in.
Connecting a CD/DVD Drive - Build Your Own PC
https://buildyourown.org.uk/pc-building/connecting/internal-cables/cd-dvd/#:~:text=CD-audio%20cable.%20Don%27t%20worry%20if%20you%20don%27t%20have,to%20your%20sound%20cards%20%27CD-IN%27%20connector.%20If%20your
Connecting a CD/DVD Drive - Build Your Own PC
https://buildyourown.org.uk/pc-building/connecting/internal-cables/cd-dvd/
Take the wider, '40way Ribbon' cable and connect one end (either will do - no twist this time) to the 40 pin connector on your CD-ROM. Note this time that the pink line must be next to where the CD-ROM Power connector is located. The Power connector on the CD-ROM is a deep white socket with 4 big pins inside. Once the connection to the CD-ROM is made, locate the specific …
How to install a CD, DVD, or another disc drive
https://www.computerhope.com/issues/ch000415.htm
Attach cables. The CD-ROM should have two cables connected to it and may have an audio cable, which is the smallest of the cables. When connecting this cable to the CD-ROM drive, it should be a 3 or 4 pin cable connection (see above picture). Make sure you are connecting this cable the cable plug and not the jumpers on the back of the drive.
CD-Rom to RCA audio project - Classicamiga
http://wiki.classicamiga.com/CD-Rom_to_RCA_audio_project
the left signal output (pin 1) goes to the outer pole of left RCA the adjacent wire of the right signal output (pin 2 ) goes to the center pole of left RCA (diagram to follow) If sound doesn't work correctly, or one of the channels is missing, try to swap pins (3 and 4) or (1 and 2). Test this before soldering to make sure it is correct.
Now you know How To Connect Cd-Rom Audio Cable
Now that you know How To Connect Cd-Rom Audio Cable, we suggest that you familiarize yourself with information on similar questions.
