We have collected the most relevant information on Icom 746pro Audio Settings. Open the URLs, which are collected below, and you will find all the info you are interested in.
Icom CAT and Digimode Interface Guide - xggcomms.com
http://www.xggcomms.com/userimages/Icom_IC_Cable_7.pdf#:~:text=Icom%20have%20chosen%20to%20standardize%20the%20Audio%20levels,%E2%80%9CLine%20Input%E2%80%9D%20or%20%E2%80%9CMicrophone%20Input%E2%80%9D%20of%20your%20soundcard.
IC-746PRO Driver Unit Repl and Adj - Rudius
https://www.rudius.net/oz2m/ic746pro/ic746pro_biasing.pdf
current settings. When reducing from 2.5 amperes to 0.50 amperes, no additional third-order distortion was noted on the opposite sideband to that which was being transmitted with normal voice operation, compressor ON and set to about 10dB of compression. Check yours as needed after adjustment, prior to extensive use at the new setting.
ALL MODE TRANSCEIVER i746PRO
http://www.kg3m.com/sitebuildercontent/sitebuilderfiles/ic-746pro-instruction-manual-1.pdf
The 32-bit DSP in your IC-746PRO is capable of giving you the type of transmit audio for your SSB Operation. POWER TRANSMIT PHONES ELEC-KEY MIC. NRA/NOTCH TUNER ANT HF/VHF TRANSCEIVER NR NOTCH AF MIC GAIN RF PWR CW PITCH F 1 F 2F3 F4 F5 XFC MP-W GENE50 0 21 7 24 8 28 9 10 4 14 5 18 6 1.8 1 3.5 2 7 3 144 ENT.
https://groups.io/g/Winlink/topic/ic_746pro_setup/16182975?20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,16182975
Hi Michael We run an Icom 746 pro at va7tsa in Abbotsford, BC. Brent mentioned baud rate. The radio on mine is set for 19200, that is found in the menu settings. I use an RT system plug that was wired to change data to tip, this may be an issue if you are just using a programming cable to try and get VFO to change the radio. 73 Don va7tsa sysop
IC-746PRO HF/50MHz/144MHz All Mode Transceiver - …
http://icomamerica.com/en/products/amateur/hf/746pro/default.aspx
The internal antenna tuner matches the HF and 50MHz bands automatically. After operating on a band for the first time, the tuner memorizes the selected antenna and preset point providing for very high speed tuning. 2 antenna connectors for HF and 50MHz bands and 1 for 144MHz band is equipped on the IC-746PRO.
Adjusting Your Rig’s DSP Settings - Heil Amateur Radio
https://heilhamradio.com/support/dsp-settings/adjusting-your-rigs-dsp-settings/
DSP Setting Example: Icom 746/756 “Pro” Series, IC-7700/7800. Press SET > LEVEL, then scroll up to SSB TX Tone (Bass); rotate the main tuning dial to set the Bass to -2 for starters (-4 if using the PR-40 or similar mic with lots of bass response).
746Pro external ALC modification | QRZ Forums
https://forums.qrz.com/index.php?threads/746pro-external-alc-modification.331694/
The downside: 3 out of the 6 746-pro we bought here locally had to be sent back for I guess what is now a common problem..that apparently has not been solved...as of yet! "Sudden No More Output" of course ICOM repaired all 3 rigs with out a hassle. I have made a video of both the 746pro Vs 756Pro on 80 meters listening on a 80 meter double bazooka.
Icom USB CAT and Digimode Interface Guide 8 pin
http://www.xggcomms.com/userimages/Icom_IC_Cable_7_USB.pdf
IC-746 pro, IC-7600, IC-7700, IC-7800, IC-910H 1. USB CAT Interface Connection. ... Baud Rate settings and so it will do the searching for you) 2. PTT Set Up ... Transmit Audio Level Again, Icom have standardized the audio level to apply to the Modulator input pin on the radio accessory sockets. The level required is approximately 100mv with an ...
IC 756PRO3 Audio Settings - K8NY
http://k8ny.com/IC756Pro3%20Audio%20Settings/IC%20756%20PRO3%20Audio.htm
Entering the SET MODE Menu: a) Press and hold the Exit/Set Button until the menu below is displayed b)Press the Level Key (F-1) - You are now in the Transmit Audio LEVEL SET menu Setting Bass and Treble Response Using the Up and Down Triangle Icons, Select SSB TX Tone (Bass) - Rotate Main Tuning Dial +3
Setting up CAT/CI-V and Audio Drivers for WSJT-X
https://www.n1fd.org/2018/11/26/wsjt-x-setup/
The audio CODEC was identified as “USB Audio CODEC” in the device manager, WSJT-X, and was the selected Input and Output device in the Windows Sound Setting as seen in Figure 4. Note: The label “microphone” has been replaced with “Line” for PCM290XC rev C CODECs used in the TS-890, other recently released radios, and when a CODEC is ...
ALL MODE TRANSCEIVER i746PRO
https://www.icomamerica.com/en/downloads/DownloadDocument.aspx?Document=21
television or stereo audio systems. The DC power supply is a device used to convert 110/220 V AC, also know as Household current, to a steady source of 13.8 V DC. The perfect match to your IC-746PRO is the PS-125. This compact switching power supply is the matching power supply for your IC-746PRO with a current rat-ing of 25 A continuous duty.
Now you know Icom 746pro Audio Settings
Now that you know Icom 746pro Audio Settings, we suggest that you familiarize yourself with information on similar questions.
