We have collected the most relevant information on Jk Audio That 2 Telephone Handset Audio Tap. Open the URLs, which are collected below, and you will find all the info you are interested in.
JK Audio THAT-2 Telephone Handset Audio Tap THAT2 …
https://www.bhphotovideo.com/c/product/264974-REG/JK_Audio_THAT2_THAT_2_Telephone_Handset_Audio.html
THAT-2 Telephone Handset Audio Tap
https://www.jkaudio.com/downloads/user-guides/JK-Audio-THAT-2-User-Guide.pdf
Unplug the modular handset cord from your telephone base. 2. Using the black handset jumper cord that we have provided, connect the Telephone jack of THAT-2 to the handset jack on your telephone base. 3. Plug your handset cord, and handset, into the Handset jack on THAT-2. 4. Connect your audio equipment to the line input and output jacks on THAT-2.
THAT-2 - JK Audio
https://www.jkaudio.com/that-2.htm
Simply unplug the handset coily cord form the base of your telephone and plug it directly into the THAT-2. Then, using the supplied cable, connect the THAT-2 back to the telephone. Now connect your audio equipment or powered speaker to the RCA or XLR jacks. The grey pushbutton selects which audio will be sent into the telephone (Out = talking on the handset, In = sending audio in …
Amazon.com: JK Audio That-2 Telephone Handset Audio …
https://www.amazon.com/JK-Audio-That-2-Telephone-Handset/dp/B07BLPK5FS
JK Audio THAT-2 Telephone Handset Audio Tap
https://www.markertek.com/product/that-2/jk-audio-that-2-telephone-handset-audio-tap
The grey push button selects which audio will be sent into the telephone (OUT = talking on the handset, IN = sending audio in through the RCA jack). The output jacks contains a nice mix of the audio from both sides of the conversation, as well as the tones being pressed on the keypad. The THAT-2 has a three-position switch which accommodates electret, dynamic and carbon …
JK Audio THAT-2 Telephone Handset Audio Tap #THAT2 ...
https://www.newegg.com/p/0SJ-002J-00003
Connect the JK Audio THAT-2 between your telephone and handset for quick access to audio in and out of the telephone. The JK Audio THAT-2 is used by radio stations to record and play …
Amazon.com: JK Audio THAT-2 : Electronics
https://www.amazon.com/JK-Audio-THAT-2/dp/B003D82WKC
JK Audio Daptor 2 (DAP2) Wireless Phone Audio Interface for use with Cell / Cordless Phones. 4.0 out of 5 stars. 7. $180.50. $180.50. JK Audio TAP-1 Telephone Audio and Power Interface, 600 ohms RCA Line Input and Output. $237.50. $237.50. Rolls PI9 Phone Patch II.
THAT-2™ - JK Audio
https://www.jkaudio.com/downloads/datasheets/JK-Audio-THAT-2-Datasheet.pdf
Record and Play Audio Clips. Simply unplug the handset coily cord from the base of your telephone and plug it directly into the THAT-2. Then, using the supplied cable, connect the THAT-2 back to the telephone. Now connect your audio equipment to the RCA or XLR jacks. The gray pushbutton selects which audio will be sent into the telephone (OUT = talking on the handset, …
QuickTap - JK Audio
https://www.jkaudio.com/quicktap.htm
Simply unplug the handset coily cord from the base of your telephone and plug it directly into the QuickTap. Then, using the supplied cable, connect the QuickTap to the base of the telephone. Now connect your audio equipment or powered speaker to the audio output jack. This jack contains a nice mix of both sides of the conversation, as well as the tones being pressed on …
THAT-1 Telephone Handset Audio Tap
https://www.jkaudio.com/downloads/user-guides/JK-Audio-THAT-1-User-Guide.pdf
4 THAT-2 Telephone Handset Audio Tap Operation Handset/ Line In Button The Handset / Line In button selects which signal will be sent down the phone line; the handset microphone, or the line input jack. Record (Position: Out) Use the handset to speak and listen as you normally would. The sound that you hear on the handset is always
Now you know Jk Audio That 2 Telephone Handset Audio Tap
Now that you know Jk Audio That 2 Telephone Handset Audio Tap, we suggest that you familiarize yourself with information on similar questions.
