We have collected the most relevant information on Kenwood Ts 450 Low Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
Kenwood TS-450 RX audio problem and does not TX | …
https://forums.qrz.com/index.php?threads/kenwood-ts-450-rx-audio-problem-and-does-not-tx.431131/
I just repaired a couple of ts-450s that had low audio on one and the tx was cutting out during transmission on the other. Replaced C104 to fix the low audio problem and had to take all three 455khz IF filters out, and clean underneath it and reseal the board and reinstall the filters to cure the TX cutting out.
Kenwood TS-450S Low Audio problem - Page 1
https://www.eevblog.com/forum/repair/kenwood-ts-450s-low-audio-problem/
Re: Kenwood TS-450S Low Audio problem « Reply #4 on: April 30, 2019, 04:27:08 am » Check electrolytic capacitor beside audio amplifier, maybe 470uF/25V, if it leak, replace and clear PCB nearby carefully, replace 2 black 455KHZ filters if needed.
KENWOOD TS-450S AF AUDIO REPAIRS | This is a shot of …
https://www.flickr.com/photos/2w0daa/15637989883
This is a shot of the AF Audio section of my old Kenwood TS-450S HF Transceiver, Fault was no audio out through the speaker! Having found capacitor C104 Leaking at the base it has caused some corrosion of the circuit track underneath the cap and this resulted in an open circuit! See picture above, So i decided to fit a new set of caps and repair the track with a very …
Modifications for the Kenwood TS-450 - Radio mods
https://www.radiomods.co.nz/kenwood/kenwoodts450.html
A common problem when using a KAM-Plus multimode with theKenwood TS-850 or TS-450 occurs when the KAM-Plus is coupled tothe Accessory-2 socket on the back of the transceiver, producingnoticable distortion of the transmitted audio when using themicrophone in SSB mode.. The problem is easy to cure by disconnecting the Accessory-2plug from the back of the …
Anyone else had kenwood TS-450S problems?
http://amfone.net/Amforum/index.php?topic=43206.0
Seems that Kenwood had a problem with the 450/690/850/950 run with their cap choices, marginal working voltages, plus the fact the rig is around 25-30 years old now. I was thinking of putting this up for sale, but it can't leave in the condition it's in.
I have a Kenwood TS450s radio that started dropping audio ...
https://www.justanswer.com/electronics/2xn94-kenwood-ts450s-radio-started-dropping-audio-intermittently.html
I have a Kenwood TS450s radio that started dropping audio intermittently on 20 and 40 meter bands and then dropped all audio completely. The S-meter moves showing that it is talking on the radio, but none coming through. I have tried an external speaker with same results.
Now you know Kenwood Ts 450 Low Audio
Now that you know Kenwood Ts 450 Low Audio, we suggest that you familiarize yourself with information on similar questions.
