We have collected the most relevant information on Kenwood Ts-50 Low Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
TS-50 low audio - YouTube
https://www.youtube.com/watch?v=-6lU1MzcNfI
This TS-50 has low audio at full gain and after switching it On it sounds cracky for a while ! Can i replace the 47 16V SMD capacitors with the typical elect...
Low receive audio on TS 50S - WorldwideDX Radio Forum
https://www.worldwidedx.com/threads/low-receive-audio-on-ts-50s.128191/
49. Likes Received: 1. I have a Kenwood TS 50S and from time to time, when receiving on LSB/USB, the receive volume gets very low and muffled. I can see on the meter that the receive sensitivity is not low just the volume. The AIP or ATT is not on but you can here the volume get low but after some time, it goes back to normal.
Kenwood TS50 No Output Power/audio | QRZ Forums
https://forums.qrz.com/index.php?threads/kenwood-ts50-no-output-power-audio.406617/
Seems easy enough to check that but the TS-50 is tiny inside and SMD troubleshooting can be difficult. A small amplifier should work as a method to check the operation of Q38. At the input to the stage there should be a low level signal from just the microphone.
#81 Radio repair: Kenwood TS-50 S intermittent no power ...
https://www.youtube.com/watch?v=6em059oiLGA
In this episode we have a Kenwood with the known hybrid boards problems but additional to that there is a more hidden exciting fault.
KENWOOD: TS-50S HF Transceiver
https://www.kenwood.com/i/products/info/amateur/ts50s.html
KENWOOD: TS-50S HF Transceiver HF Transceiver TS-50S As small as it is, the TS-50S packs a powerful punch. Maximum output is 100 W, and there is an impressive range of features -- including 100 memory channels, DDS with innovative …
Modifications for the Kenwood TS-50 - Radio mods
http://www.radiomods.co.nz/kenwood/kenwoodts50.html
"Honey - I Shrunk the Rig" by Bob Gobrick WA6ERB No this is not an article about Kenwood shrinking their new TS-50 HF rig into a "CB" sized package, but the "shrinking" of the low power level on the TS-50 from 10 watts to 5 watts output in order to "officially" comply with the nationally recognized QRP power level for contest operation.
Kenwood AT-50 user manual - RadioManual
http://www.radiomanual.info/schemi/KENW_ACC/Kenwood_AT-50_user.pdf
Turn the TS-50S power sw'tch off. 2 Connect either end of the supp ied Control cable or the PG-4M cab e (6 m) to the transceiver ACC connector. Connect the other end of the cable to the match'ng AT-50 connector. 3. Connect the coaxial cable ( PL-259(M) connector) to the transceiver ANT connector and the AT-50 INPUT IOOW connector. 4.
Kenwood TS-450S Low Audio problem - Page 1
https://www.eevblog.com/forum/repair/kenwood-ts-450s-low-audio-problem/
Kenwood TS-450S Low Audio problem « on: April 25, 2019, 05:48:59 pm » Have a TS-450S Transceiver from an SK Ham Estate that seems to work all OK, puts our rated power, but Audio on spkr is very weak (Checked spkr - OK), a little better on phones but there is …
850 Repair Page - kkn.net
https://www.kkn.net/n6tr/850repair.html
22-04-2000 TS-850S Low/no Receive sensitivityReports of low or no receive sensitivity accompanied by a lack of audio from the speaker during CW or SSB modes might be caused by improper RXB voltage levels. Normal RXB voltage is +8 Vdc during receive and 0 Vdc during transmit.
Kenwood TS-590S Audio Profiles - W1AEX
http://www.w1aex.com/ts590s/ts590s.html
Transmit audio is a very subjective topic but most people would agree that it's possible to get reasonable results with the Kenwood TS-590S. The audio EQ profile tool allows the user to boost any slider by +6 dB from the 0 dB baseline and cut any slider by …
Now you know Kenwood Ts-50 Low Audio
Now that you know Kenwood Ts-50 Low Audio, we suggest that you familiarize yourself with information on similar questions.
