We have collected the most relevant information on Lav Audio Ac3 Problem. Open the URLs, which are collected below, and you will find all the info you are interested in.
LAVFilters Problem with left\right channel balance for ac3 ...
https://gitanswer.com/lavfilters-problem-with-left-right-channel-balance-for-ac3-c-874327654
LAVFilters Problem with left\right channel balance for ac3? C++ I've been having this issue for lots if not most movie files - translated audio stream has most sound effects shifted to left channel and right channel stays pretty much silent while the …
Codecs - Correct LAV Setup / Conversion DTS->AC3 possible ...
https://forum.team-mediaportal.com/threads/correct-lav-setup-conversion-dts-ac3-possible.101881/
If you want to bitstream DTS you obviously have to select it for bitstreaming in the LAV Audio Configuration DTS won't be translated to AC3, but since your receiver does support DTS it will play it as real 5.1 DTS. BTW: DTS HD Master Audio can't be bitstreamed through S/PDIF, it needs HDMI (and a receiver that can deal with it, which yours can't).
LAV Audio | 1f0.de – open-source in a closed world
https://1f0.de/lav-audio/
LAV Audio supports Bitstreaming of Audio to a AV-Receiver through either HDMI or S/PDIF. Bitstreaming means that the Audio is not decoded in your PC, instead its transmitted untouched to your receiver, which then takes care of the decoding. S/PDIF supports AC3 and DTS bitstreaming. HDMI supports AC3, E-AC3, TrueHD, DTS and DTS-HD.
[Solved] Fail to use LAV Filters - Zoom Player - Support ...
https://forum.inmatrix.com/index.php?showtopic=14195
It's not LAV - but if you used AC3 Filter, and it too failed, it would indicate that LAV is not the problem. Equally, if AC3 Filter worked and you hadn't changed anything about your audio system (except swap LAV for AC3 Filter), than …
AC3/A52 audio codec for Premiere - Adobe Support Community ...
https://community.adobe.com/t5/premiere-pro-discussions/ac3-a52-audio-codec-for-premiere/m-p/2660865
Anyway, about this A52 audio, there's no kidding here. It's there existing. I played my video in VLC, look for its audio stream and it says a52. I googled a52 and I found a page saying a52 is just the same as ac3, both are dolby digital sound. Well, I don't about their particularities but problem is that pr can't recognize the audio of my video.
Guide: Setting Up LAV Filters + MPC HC For All Your ...
http://www.mediasmartserver.net/2011/06/30/guide-setting-up-lav-filters-mpc-hc-for-all-your-splitter-and-audio-needs/
Q: Can LAV Audio decode DTS-HD? A: Kind of. On its own, it cannot. But, LAV Audio supports using the ArcSoft DTS decoder, which allows decoding of full DTS-HD. Just drop the “dtsdecoderdll.dll” from the TMT3/5 Codecs directory into LAV Audio’s directory, and enjoy. Q: I do not get any audio when using ffdshow as a post processor. What gives?
Avidemux audio conversion question - VideoHelp Forum
https://forum.videohelp.com/threads/400909-Avidemux-audio-conversion-question
Avidemux audio conversion question. I'm kind of new to all of this and I'm having a lot of trouble figuring out the difference between AC3 ( Aften) and AC3 (lav). I'm trying to convert some eac3 files that are causing some issues. Any advice on which, (Aften) or (lav), are better or should be used would be appreciated.
Audio Codec Problem on Win 10 - NextPVR Forums
https://forums.nextpvr.com/showthread.php?tid=55273
Here is the problem. Video is captured fine, audio stutters and is staticy. The same file plays fine with VLC, which uses A52 codec. Watching TV through NPVR also works fine. Tried various codecs, Microsoft DTV-DVD, ffdshow. Installed SAF6, tried all of its AC3 codecs, still get stuttering on playback. Things to try?
Avidemux 2.6.1 AC3 (Aften)
https://avidemux.org/smif/index.php?topic=11790.0
Re: Avidemux 2.6.1 AC3 (Aften) January 29, 2013, 12:30:42 PM #2 Last Edit: January 29, 2013, 01:35:09 PM by Alexander. Thank you Jan, I want my video to audio, problems makes ac3 (aften) encoder. audio output, AC3 (aften) encoded video no sound. AC3 (laf) works. Sorry for my english. Via Google translator.
LAV won't bitstream anything; can't play TrueHD/DTSMA ...
https://www.avsforum.com/threads/lav-wont-bitstream-anything-cant-play-truehd-dtsma.1370420/
Nezara. I'm attempting to use LAV (0.38) in Media Player Classic (1.5.2.3456). However, if I try to play a format that is set to be bitstreamed, it will instead fall back on the internal AC3 decoder. Deselecting the bitstream checkbox allows the audio filter to be used, however this method only decodes the core track for DTSMA, and TrueHD ...
Now you know Lav Audio Ac3 Problem
Now that you know Lav Audio Ac3 Problem, we suggest that you familiarize yourself with information on similar questions.
