We have collected the most relevant information on M Audio Rtp Avp 8 101. Open the URLs, which are collected below, and you will find all the info you are interested in.
Description of Media parameter in SIP "m=audio 12548 …
https://stackoverflow.com/questions/27869523/description-of-media-parameter-in-sip-m-audio-12548-rtp-avp-0-8-101
Next, type of media is "audio", not video, for example. (m=audio). 12548 is a port address for streaming media. "RTP/AVP" means "RTP Audio/Video Profile" and representing one of RTP profiles, which are coded by 0, 8 and 101. 0 is PCMU 8000 Hz, 8 is PCMA 8000 Hz, and 101 is payload type for DTMF digits sending.
UNDERSTANDING SIP TRACES - Cisco Community
https://community.cisco.com/t5/collaboration-voice-and-video/understanding-sip-traces/ta-p/3137704
m=audio 25268 RTP/AVP 18 0 8 101 . This line defines the media attribtes that will be used for the call. Audio: means that this is an Audio call, we can also have m=video in case of a Video call. 25268: Is the dynamic RTP port used for the call. RTP/AVP: Represents the RTP/AVP profile number for each of the profiles listed.
VoIP Protocols: SIP - Session Description Protocol
http://toncar.cz/Tutorials/VoIP/VoIP_Protocols_SIP_Session_Description_Protocol.html
m= media type, format, and transport address: m=<media> <port> <transport> <format list> In our example message, this is: m=audio 11424 RTP/AVP 0 8 101 The <media> is either "audio" or "video" (if the call contained both audio and video
Knowledgebase Article: SmartMedia: SDP profile ...
https://www.patton.com/support/kb_art.asp?art=408
m=audio 0 RTP/AVP 0 8 101 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=silenceSupp:off - - - - Below is a direct SIP INVITE with T.38. This can be useful if you know this route will always be with fax. It also doesn't require any IVR resources to detect the fax tones:
Now you know M Audio Rtp Avp 8 101
Now that you know M Audio Rtp Avp 8 101, we suggest that you familiarize yourself with information on similar questions.
