We have collected the most relevant information on Mac Mini Audio Board Ribbon Cable. Open the URLs, which are collected below, and you will find all the info you are interested in.
Mac mini Model A1176 Audio Board Replacement - iFixit ...
https://www.ifixit.com/Guide/Mac+mini+Model+A1176+Audio+Board+Replacement/1113
Lift the audio board ribbon cable up out of its socket. If it refuses to lift from its socket, the ZIF cable lock is not fully released. Make sure it is evenly lifted about 1 mm from the socket on the interconnect board. Add a comment Step 10 Rotate the mini so that the SuperDrive slot loading mechanism is facing you.
Mac mini Model A1176 IR Board & Cable Replacement - …
https://www.ifixit.com/Guide/Mac+mini+Model+A1176+IR+Board+&+Cable+Replacement/1106
Lift the audio board ribbon cable up out of its socket. If it refuses to lift from its socket, the ZIF cable lock is not fully released. Make sure it is evenly lifted about 1 mm from the socket on the interconnect board. Add a comment 64 Bit Mako Driver Kit A bit for opening every modern gadget. Shop Driver Kits Step 10
Mac mini Model A1283 IR Board & Cable Replacement - …
https://www.ifixit.com/Guide/Mac+mini+Model+A1283+IR+Board+&+Cable+Replacement/1061
Power down your Mac mini, disconnect all of the cables, and flip it over. ... Use the flat end of a spudger to pry the audio ribbon cable connector up off the audio board. Edit . Add a comment . Add a comment . Add Comment Cancel . Post comment. Step 12. Remove the following four screws securing the internal frame to the bottom housing: ...
No sound on Mac Mini - Apple Community
https://discussions.apple.com/thread/2464583
I saw your post about replacing the Mac mini audio board due to a cracked cable from repeated installs. I have the same problem. I installed a new hard drive in my mini but once I reconnected the gold ribbon cable of course there is no sound.
Mac mini Model A1283 Audio Board Replacement - iFixit ...
https://www.ifixit.com/Guide/Mac+mini+Model+A1283+Audio+Board+Replacement/1059
Step 9. Use the tip of a spudger to depress the audio board retaining clip (shown in red) to release the audio board from the bottom housing. Lift the audio board from its free end and remove it from the mini. Don't forget to transfer the audio ribbon cable to …
Now you know Mac Mini Audio Board Ribbon Cable
Now that you know Mac Mini Audio Board Ribbon Cable, we suggest that you familiarize yourself with information on similar questions.
