We have collected the most relevant information on Martin Audio Compression Driver. Open the URLs, which are collected below, and you will find all the info you are interested in.


H3 multi page - martin-audio.com

    https://martin-audio.com/downloads/archive/datasheets/H3datasheet.pdf
    DRIVERS 15" (380mm) bass driver 10" (250mm) mid driver 1" (25mm) exit compression driver RATED POWER (2) LF: 500W AES, 2000W peak MF + HF: 300W AES, 1200W peak RECOMMENDED AMPLIFIER LF: 400-1000W into 4 ohms MF + HF: 400-650W into 4 ohms SENSITIVITY (6) LF: 104dB, MF + HF: 104dB MAXIMUM SPL (7) 130dB continuous, 136dB peak

PI12 | P.I. Series - martin-audio.com

    https://martin-audio.com/products/loudspeakers/pi12
    DRIVERS : LF: 12” (300mm)/2.5” (63.5mm) voice coil, ferrite motor system HF: 1” (25mm) exit/1.4” (35mm) voice coil, polyimide dome compression driver: RATED POWER : 300W (AES), 1200W (Peak) RECOMMENDED AMP : VIA5002 : SENSITIVITY : 98dB : MAXIMUM SPL : 123dB continuous, 129dB peak: NOMINAL IMPEDANCE : 8 ohms : DISPERSION (-6dB) 80° H x 50° V …

Martin Audio Catalogue - Warehouse Sound

    http://warehousesound.com/martinpro.php
    15" LF driver; 1.4" exit HF compression driver; Frequency response 55Hz~18kHz; Dispersion 80°x50° Sensitivity 100dB 1w/1m; Maximum SPL 124dB/1m continuous; Power capacity 400w continuous 1600w peak; Crossover 1.4kHz passive; Weight 30.5kg

Speaker Drivers & Horns - Martin Audio

    https://thea.com/Speaker-Drivers-Horns-Martin-Audio/
    Powered by Up for auction is a used 18" Martin Audio WSX-18 Driver. This driver comes from a broadcasting background and has been tested. The woofer crackled when tested. And did not pass audio. This unit is for parts and repair. The woofer reads at 8 Ohms. Cosmetically it is in good condition. Some marks and scratches but that is all.

28–31 - martin-audio.com

    https://static.martin-audio.com/downloads/brochures/MLA-brochure.pdf
    traditionally used large-format compression driver was replaced with a combination of a 6½" cone upper-mid and smaller 1" compression driver. This arrangement overcame the power and distortion limitations of large format compression drivers and remains a cornerstone of our design philosophy today. In 2002 Martin Audio introduced the W8L line array.

The Ultimate in Entertainment - martin-audio.com

    https://static.martin-audio.com/downloads/brochures/Blackline3-brochure.pdf
    The HF compression driver utilises a 1.75” (44mm) polyimide diaphragm for extended high frequency response and features a phase-plug with a low-compression ratio to reduce non- linearity caused by high air pressure within the compression driver.

Martin Audio M1232 Speaker Driver - CUE Spares

    https://cuespares.com/product/martin-audio-m1232-speaker-driver/
    Martin Audio M1232 Speaker Driver - CUE Spares. Sold out. Click to enlarge. Home Audio Parts Martin Audio Parts. Martin Audio M1232 Speaker Driver. Previous product. JBL 2445J Compression Driver € 99,00 Excl. VAT. Back to products.

LE Series - Martin Audio

    https://www.martinaudio.it/series/le-series/
    It features a 12” (300mm) LF /1” (25mm) exit HF Coaxial Differential Dispersion driver to distribute sound evenly over the listening plane. The LF driver section has a 2.5” (65mm) voice coil and an efficient motor system with an aluminium demodulating ring to minimise distortion. The coaxial HF driver utilises a 1.75” (44mm) polyimide dome and features a low-compression phase-plug …

LE100 - Martin Audio

    https://www.martinaudio.it/products/le100/
    DRIVERS: LF: 12” (300mm)/2.5” (63.5mm) voice coil, long excursion, shared ferrite motor system with HF ; HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver ; RATED POWER : 300W AES, 1200W peak: SENSITIVITY : 97dB: MAXIMUM SPL : 129dB peak: NOMINAL IMPEDANCE: 8Ω: DISPERSION (-6dB) 110°-60° horizontal, 60° vertical: CROSSOVER

Martin Audio Debuts WPS Line Array - ProSoundNetwork.com

    https://www.prosoundnetwork.com/gear-and-technology/martin-audio-debuts-wps-line-array
    Martin Audio Unveils BlacklineX Powered Series The 4” midrange drivers are compression-loaded in an effort to raise efficiency and enter the horn walls via annular slots close to the HF throat to sum with the HF wavefront. In the HF section, four 1” exit compression drivers deliver high frequency sound.

Now you know Martin Audio Compression Driver

Now that you know Martin Audio Compression Driver, we suggest that you familiarize yourself with information on similar questions.