We have collected the most relevant information on M=Audio 0 Rtp/Avp 96. Open the URLs, which are collected below, and you will find all the info you are interested in.
Knowledgebase Article: SmartMedia: SDP profile ...
https://www.patton.com/support/kb_art.asp?art=408
m=audio 0 RTP/AVP 0 8 4 96 97 18 98 13 a=rtpmap:96 iLBC/8000 a=rtpmap:97 iLBC/8000 a=fmtp:97 mode=20 a=rtpmap:98 telephone-event/8000 Each line of the Profile SDP Description consists of text of the form <type>=<value>. <type> is always exactly one character and is case-significant. <value> is a structured text string whose format depends on ...
UNDERSTANDING SIP TRACES - Cisco Community
https://community.cisco.com/t5/collaboration-voice-and-video/understanding-sip-traces/ta-p/3137704
m=audio 25268 RTP/AVP 18 0 8 101 . This line defines the media attribtes that will be used for the call. Audio: means that this is an Audio call, we can also have m=video in case of a Video call. 25268: Is the dynamic RTP port used for the call. RTP/AVP: Represents the RTP/AVP profile number for each of the profiles listed.
SDP Codec Selection and QoS Signaling - EventHelix.com
https://www.eventhelix.com/ims/sdp/sdp_codec_selection_resource_allocation.pdf
t=<start-time> 0, m=audio <called-port> RTP/AVP 96 97, a=rtpmap:96 H263, a=rtpmap:97 AMR, a=curr:qos local none, a=curr:qos remote none, a=des:qos mandatory local sendrecv, a=des:qos mandatory remote sendrecv, a=conf:qos remote sendrecv The UE replies back with 96 and 97 in the "m=" line. 98 is removed as telephone-event (DTMF handling) is not supported.
[Sip-implementors] Is it valid a=rtpmap:96 telephone-event ...
https://sip-implementors.cs.columbia.narkive.com/UawbXnII/is-it-valid-a-rtpmap-96-telephone-event-8000
m=audio 5970 RTP/AVP 18 0 4 8 96. a=rtpmap:18 G729/8000. a=rtpmap:0 PCMU/8000. a=rtpmap:4 G723/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:96 telephone-event/8000. I know that RFC 2833 or 4733/4734 do not mandate a specific payload.
rfc3551 - Internet Engineering Task Force
https://tools.ietf.org/html/rfc3551
RFC 3551 RTP A/V Profile July 2003 4.5.13 MPA MPA denotes MPEG-1 or MPEG-2 audio encapsulated as elementary streams. The encoding is defined in ISO standards ISO/IEC 11172-3 and 13818-3. The encapsulation is specified in RFC 2250 [ 14 ].
[MS-RTSP]: RTP Payload Format for ASF Data Packets ...
https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-rtsp/5f686330-b650-411d-8e3a-013d0e6d8922
In this article. The RTP payload format for ASF data packets, as specified in section 2.2.1, MUST be identified by the MIME type "audio/x-asf-pf" for audio streams , "video/x-asf-pf" for video streams, and "application/x-asf-pf" for streams that are neither audio nor video. The RTP clock frequency MUST be 1,000 Hz.
Now you know M=Audio 0 Rtp/Avp 96
Now that you know M=Audio 0 Rtp/Avp 96, we suggest that you familiarize yourself with information on similar questions.
