We have collected the most relevant information on Miller Audio Research Analyzer. Open the URLs, which are collected below, and you will find all the info you are interested in.


Automated Audio Test from Miller Audio Research

    http://www.milleraudioresearch.com/
    Miller Audio Research designs, manufactures and supplies advanced test solutions to the world's leading audio and AV manufacturers. Reflecting over 20 years experience in audio test, we also provide report data and unrivalled technical analysis for specialist hi …

About Miller Audio Research

    http://www.milleraudioresearch.com/aboutus/about_1.html
    Miller Audio Research was founded by Paul Miller in response to demand from the hi-fi industry for access to his proprietary test and measurement solutions enjoyed by the specialist audio press. Our first test solution, the Jitter Measurement Suite (JMS), provided a unique insight into the impact of jitter on the performance of digital audio ...

Miller Audio Research

    http://www.milleraudioresearch.com/avtech/index.html
    This service is free but we ask all our readers to register their name and e-mail address with Miller Audio Research before accessing this password-protected area of the site. Examples of (limited) test reports from 2003/4 can be accessed without registration further down this page.

Audio Research CD2 CD player Measurements | …

    https://www.stereophile.com/content/audio-research-cd2-cd-player-measurements
    Finally, I used the Miller Audio Research analyzer (footnote 1) to look at the CD2's jitter performance. This drives the CD player under test with data representing an 11.025kHz tone at -10dBFS and a 229Hz tone toggling the LSBs on and off while it performs a high-resolution FFT analysis—32,768 points, with 64 FFTs averaged—to examine the ...

Balanced Audio Technology VK-D5 CD player …

    https://www.stereophile.com/content/balanced-audio-technology-vk-d5-cd-player-measurements-part-2
    To ascertain a CD player's jitter performance, therefore, we have switched to using the Miller Audio Research analyzer. This drives the CD player under test with data representing an 11.025kHz tone at -10dBFS while a 229Hz squarewave toggles the LSBs on and off. A high-resolution FFT analysis—32,768 points, with 64 FFTs averaged—examines ...

Meridian 508.24 CD player Measurements | …

    https://www.stereophile.com/content/meridian-50824-cd-player-measurements
    I used the Miller Audio Research analyzer to look at the Meridian's jitter performance. This drives the CD player under test with data representing an 11.025kHz tone at -10dBFS, a 229Hz tone toggling the LSBs on and off while it performs a high-resolution FFT analysis—32,768 points, with 64 FFTs averaged—to examine the noise floor in the ...

YBA Design WD202 D/A headphone amplifier …

    https://www.stereophile.com/content/yba-design-wd202-da-headphone-amplifier-measurements
    Finally, testing the WD202's S/PDIF for its rejection of jitter, using the Miller Audio Research Analyzer and my worst-case source of a PC playing a 16-bit J-Test tone via 15' of plastic TosLink cable, gave 455 picoseconds peak–peak of jitter-related spuriae in its analog output. This mainly comprised data-related sidebands at ±229Hz, and is ...

Musical Fidelity M1 CLiC universal music controller ...

    https://www.stereophile.com/content/musical-fidelity-m1clic-universal-music-controller-measurements
    Sidebar 3: Measurements I used Stereophile's loan sample of the top-of-the-line Audio Precision SYS2722 system to measure the Musical Fidelity M1CLiC (see www.ap.com and the January 2008 "As We See It"); for some tests, I also used my vintage Audio Precision System One Dual Domain and the Miller Audio Research Jitter Analyzer, and first updated the M1CLiC's firmware.

Bel Canto e.One DAC3.5VB D/A converter Measurements ...

    https://www.stereophile.com/content/bel-canto-eone-dac35vb-da-converter-measurements
    Sidebar 3: Measurements I used Stereophile's loan sample of the top-of-the-line Audio Precision SYS2722 system to perform the measurements on the Bel Canto e.One DAC3.5VB (see www.ap.com and the January 2008 "As We See It"); for some tests, I also used my vintage Audio Precision System One Dual Domain and the Miller Audio Research Jitter Analyzer.

Buy and Sell High-end Audio Equipment or Music on Audiogon

    https://www.audiogon.com/
    If it's audio related and you want to buy it, sell it, or look for it, then we are your one-stop, comprehensive resource. A mainstay of the audiophile world since the late '90s, AudiogoN is the largest, most respected high-end audio community in the industry.

Now you know Miller Audio Research Analyzer

Now that you know Miller Audio Research Analyzer, we suggest that you familiarize yourself with information on similar questions.