We have collected the most relevant information on Mpeg-1 Audio Frame Header. Open the URLs, which are collected below, and you will find all the info you are interested in.
MPEG Audio Frame Header - CodeProject
https://www.codeproject.com/articles/8295/mpeg-audio-frame-header
2.1. MPEG Audio Frame Header. The header at the beginning of each frame is 32 bits long and has the following format. The bit 0 in the header …
MPEG AUDIO FRAME HEADER - mpgedit
http://www.mpgedit.org/mpgedit/mpeg_format/mpeghdr.htm
sample rates the same as those of MPEG-1 highest possible bitrate goes up to about 1Mbps for 5.1 MPEG Audio Frame Header. An MPEG audio file is built up from smaller parts called frames. Generally, frames are independent items. Each frame has its own header and audio informations. There is no file header.
MPEG Audio Frame Headers - The Schworak Site
https://schworak.com/blog/e42/mpeg-audio-frame-headers/
sample rates the same as those of MPEG-1; highest possible bitrate goes up to about 1Mbps for 5.1 MPEG Audio Frame Header. An MPEG audio file is built up from smaller parts called frames. Generally, frames are independent items. Each frame has its own header and audio informations. There is no file header.
MPEG Audio Frame Header - Idea2IC
http://www.idea2ic.com/File_Formats/MPEG%20Audio%20Frame%20Header.pdf
When you want to read info about an MPEG file, it is usually enough to find the first frame, read its header and assume that the other frames are the same (which may not be always the case). The frame header is constituated by the very first four bytes (32bits) in a frame. The first eleven bits of a frame header are always set and they are called "frame sync".
MPEG AUDIO FRAME HEADER - Juniata College
http://jcsites.juniata.edu/faculty/rhodes/ida/mpeghdr.htm
Read the BitRate, SampleRate and Padding (as value of one or zero) of the frame header and use the formula: FrameSize = 144 * BitRate / SampleRate + Padding Example: BitRate = 128000, SampleRate=441000, Padding=0 ==> FrameSize=417 bytes MPEG Audio Tag MP3v1. The TAG is used to describe the MPEG Audio file.
MPEG Audio Frame Header - Everything2.com
https://www.everything2.com/title/MPEG+Audio+Frame+Header
This frame would be MPEG 1, Layer 3(B is 11, and C is 01). The frame lacks a CRC checksum(D is 1). It has a bit rate of 128 and a sampling rate of 44100(E is 1001 and F is 00). The frame is padded(G is 1). It's channel mode is Stereo(I is 00 and J is 00). It's an original copy that is not copyrighted(K is 0 and L is 1). It has no emphasis(M is 00).
MPEG Audio Layer I/II/III frame header - MP3' Tech
http://www.mp3-tech.org/programmer/frame_header.html
The first twelve bits (or first eleven bits in the case of the MPEG 2.5 extension) of a frame header are always set to 1 and are called "frame sync". Frames may also feature an optional CRC checksum. It is 16 bits long and, if it exists, immediately follows the frame header. After the CRC comes the audio data.
MPEG headers Quick Reference - SourceForge
http://dvd.sourceforge.net/dvdinfo/mpeghdrs.html
MPEG Headers Quick Reference ... MPEG-1 or MPEG-2 audio stream: 0xE0 - 0xEF: MPEG-1 or MPEG-2 video stream: 0xF0: ECM Stream: 0xF1: EMM Stream: 0xF2: ... This field is used by MPEG-1 only, for MPEG-2 it should be set to 0 1 1 1 If frame type = 3 (B) the following 4 bits are appended to the header: 3 2 1 0;
Now you know Mpeg-1 Audio Frame Header
Now that you know Mpeg-1 Audio Frame Header, we suggest that you familiarize yourself with information on similar questions.
