We have collected the most relevant information on Mplayer Ac3 Passthrough Pulseaudio. Open the URLs, which are collected below, and you will find all the info you are interested in.
HDMI Pulseaudio and ac3 passthrough - …
https://www.linuxquestions.org/questions/linux-hardware-18/hdmi-pulseaudio-and-ac3-passthrough-945612/
I tried now with debian with pulseaudio installed and could only get HDMI sound through ALSA (selected in VLC, mplayer) but no system sound or sound through webbrowser etc, and no ac3 passthrough. When playing a video file I see a soundbar moving (in volume control for pulse) in HDMI, so the system is getting sound but nothing out of the speakers.
LinuxQuestions.org - HDMI Pulseaudio and ac3 …
https://www.linuxquestions.org/questions/linux-hardware-18/hdmi-pulseaudio-and-ac3-passthrough-945612-print/
The HDMI is connected to the Nvidia GTX 560Ti card and I have installed the propriatary drivers (295.20) I had linux mint 11 installed before and had sound via HDMI and also ac3 passthrough worked for Dolby surround (via spdif in VLC and Mplayer). I think I uninstalled pulseaudio on my previous Mint 11 to get it to work.
3.9. Surround/Multichannel playback - MPlayer - The …
http://www.mplayerhq.hu/DOCS/HTML/en/advaudio-surround.html
3.9. Surround/Multichannel playback. 3.9.1. DVDs. Most DVDs and many other files include surround sound. MPlayer supports surround playback but does not enable it by default because stereo equipment is by far more common. To play a file that has more than two channels of audio use -channels . For example, to play a DVD with 5.1 audio:
DigitalAC-3Pulseaudio - Community Help Wiki
https://help.ubuntu.com/community/DigitalAC-3Pulseaudio
This page will help you to output 5.1 AC-3 through Alsa, enabling Pulseaudio to use it. The default is to export audio over SPDIF using PCM, which is stereo-only. Automated installer script. The following script does the steps outlined in the rest of the document. It has only been tested on Ubuntu 14.04 in 2014-12-27. Warning though, do not run ...
[Solved]AC3 passthrough worked last week, but not anymore ...
https://bbs.archlinux.org/viewtopic.php?id=91024
my guess is, that pulseaudio grabs your spdif device as second output device. but to use passthrough, the ac3 stream has to be the only one playing on that device. whats the output if you do: mplayer -ao alsa:device=spdif -ac hwac3 <some file with ac3 audio>
#1979 (HDMI passthrough not working with "ac3be ...
https://trac.mplayerhq.hu/ticket/1979
Audio output works fine with pulseaudio or alsa. But unfortunately mplayers HDMI passthrough has problems... Playing a movie like: mplayer -v -ao alsa:device=hdmi -afm hwac3 "Media/_DOWNLOADS_/Brüno (2009) _ [eng;ac3-dpl+ger;ac3-dpl] _ x264-dvdrip.mkv" HDMI passthrough is not working if the audio track of the movie is in "ac3be"-format, like:
ac3 passthrough via HDMI (MOSTLY SOLVED) - Linux Mint Forums
https://forums.linuxmint.com/viewtopic.php?t=102319
ok a big breakthrough, I get ac3 passthrough with Dolby when i use mplayer: mplayer -ao alsa:device=hw=1.7 -ac hwdts,hwac3 movie.avi so its definately working. But I cant seem to figure out how to get it to work with the GUI players (vlc, GNOME Mplayer, SMplayer) and if i run the smplayer in terminal with the same options it just crashes ...
No audio with passthrough (works in VLC and mplayer)
https://forum.kodi.tv/showthread.php?tid=91016
Output from a successful playback with mplayer (command quoted above) ... [hwac3] AC3/DTS pass-through S/PDIF hwac3: switched to AC3, 448000 bps, 48000 Hz AUDIO: 48000 Hz, 2 ch, ac3be, 448.0 kbit/29.17% (ratio: 56000->192000) ... I tried it though and got everything to work just fine except the passthrough part (as Pulseaudio apparently doesn't ...
sound - Pulseaudio/ALSA/Kodi audio passthrough on …
https://askubuntu.com/questions/1237849/pulseaudio-alsa-kodi-audio-passthrough-on-20-04
I can't answer your question exactly but I have a similar setup but running Pulseaudio with audio passthrough (DD & DTS) working fine on Kodi 18.6, I did not have to adjust or disable Pulseaudio. This is with 19.10 though as I …
GStreamer Conference 2011 Program
https://gstreamer.freedesktop.org/conference/2011/speakers.html
October 24 - 25, 2011 · Clarion Congress Hotel · Prague, Czech Republic. Back to conference main page. Back to conference timetable. Keynote - GStreamer 1.0, Wim Taymans, Collabora. Wim Taymans is one of the founders of the GStreamer project and the man behind the current GStreamer design. Wim has a long history in the development of ...
Now you know Mplayer Ac3 Passthrough Pulseaudio
Now that you know Mplayer Ac3 Passthrough Pulseaudio, we suggest that you familiarize yourself with information on similar questions.
