We have collected the most relevant information on Mplayer Use 6 Ch Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.


3.10. Channel manipulation - MPlayer

    http://www.mplayerhq.hu/DOCS/HTML/en/advaudio-channels.html
    mplayer 6-channel.wav-af pan=2:1:0:0:1:1:0:0:1:0.5:0.5:1:1 The percentages listed above are only a rough example. Feel free to tweak them. Example: Playing 5.1 audio on big speakers without a subwoofer. If you have a huge pair of front speakers you may not want to waste any money on buying a subwoofer for a complete 5.1 sound system.

3.9. Surround/Multichannel playback - MPlayer - The …

    http://www.mplayerhq.hu/DOCS/HTML/en/advaudio-surround.html
    mplayer dvd://1 -channels 6 -af hrtf. hrtf only works well with 5 or 6 channels. Also, hrtf requires 48 kHz audio. DVD audio is already 48 kHz, but if you have a file with a different sampling rate that you want to play using hrtf you must resample it: mplayer filename-channels 6 -af resample=48000,hrtf

MPlayer

    https://mplayerhq.hu/DOCS/man/en/mplayer.1.html
    MPlayer prints the available audio IDs when run in verbose (-v) mode. When playing an MPEG-TS stream, MPlayer/MEncoder will use the first program (if present) with the chosen audio stream.-ausid (also see -alang) Select audio substream channel.

MPlayer(1) manual page - SourceForge

    http://tivo-mplayer.sourceforge.net/docs/mplayer-man.html
    Use -audio-demuxer 17 to force .mp3 detection. -audiofile <filename> Play audio from an external file (WAV, MP3 or Ogg Vorbis) while viewing a movie. ... Play only chapters 5, 6, 7 mplayer -dvd 1 -chapter 5-7 Multiangle DVD playing mplayer -dvd 1 -dvdangle 2 Playing from a different DVD device mplayer -dvd 1 -dvd-device /dev/:dvd2

Play Dolby Digital 5.1 Audio on Raspberry Pi : 4 Steps ...

    https://www.instructables.com/Play-Dolby-Digital-51-Audio-on-Raspberry-Pi/
    Introduction. Playing a sound file encoded in Dolby Digital 5.1 is doable with Raspberry Pi 2's quad-core processor that runs at 900MHz. In this instructable, a media player called MPLAYER will be used to decode sound encoded in Dolby Digital 5.1 and send the 6 channels of audio to an ALSA Virtual Device. The ALSA Virtual Device downmixes the 6 channels of audio into 2 …

Now you know Mplayer Use 6 Ch Audio

Now that you know Mplayer Use 6 Ch Audio, we suggest that you familiarize yourself with information on similar questions.