We have collected the most relevant information on Mumble Audio Per Packet. Open the URLs, which are collected below, and you will find all the info you are interested in.
MMO-Mumble: Advanced Options - High-quality Mumble hosting f…
https://mmo-mumble.com/help/AdvancedOptions#:~:text=Audio%20per%20packet%3A%20This%20is%20the%20amount%20of,noise%20like%20fans%2C%20speaker%20noise%2C%20and%20small%20children.
Voice data — Mumble Protocol 1.2.5-alpha
http://mumble-protocol.readthedocs.io/en/latest/voice_data.html
The mumble audio channel packets are variable length packets that begin with an 8-bit header field which describes the packet type and target. The most significant 3 bits define the packet type while the remaining 5 bits define the target. The header is followed by the packet payload. The maximum size for the whole audio data packet is 1020 bytes.
Bug: Recording is wrong with non-default „ Audio per ...
https://github.com/hbeni/fgcom-mumble/issues/152
The mumble client default „audio per packet“ setting is 20. This is also what is hardcoded currently in the recorder bots FGCS file header. When the actual recorded packets speed differ from that (10 or 40, 60), the Play-back gets too slow or too fast and potentially garbled.
Mumble - Fixing Mumble Robotic or Distorted Sound
https://www.mumble.com/support/mumble-server-robotic-distorted-voice.php
Open Mumble. Open the Mumble Configuration Menu. At the top of the Mumble program click the "Configure" option then click "Settings". Set Advanced Mode. At the bottom left of the program select the "Advanced" option. Change the Compression Settings. Try lowering the codec quality down a few selections, as well as increasing the audio per packet ...
MMO-Mumble: Advanced Options - High-quality Mumble …
https://mmo-mumble.com/help/AdvancedOptions
Audio per packet: This is the amount of audio that Mumble sends at a time. A lower value means less latency, but might potentially introduce quality loss, if too low. We recommend that you leave this at 20 ms. Noise Suppression: Mumble will automatically filter out background noise like fans, speaker noise, and small children. This slider will ...
Other Programs > Mumble
https://rigpi.net/help/mumble.html
Audio per packet: This is the amount of audio that Mumble sends at a time. A lower value means less latency, but might potentially introduce quality loss, if too low. I recommend that you leave this at 20 ms. Noise Suppression: Mumble can automatically filter out static background noise. When set to Speex, RNNoise or Both, a slider will adjust ...
1.2.0 Upgrade - Mumble Wiki
https://wiki.mumble.info/wiki/Upgrade
While the default setting still is 20ms of audio per packet, Mumble 1.2.0 can use 10ms packets for lower latency. This means twice as many packets per second, which places twice the load on network drivers and kernel. If you host servers for hundreds of users, we recommend using a high quality network card with good driver support.
Mumble / Discussion / Help: Mumble voice lag
https://sourceforge.net/p/mumble/discussion/492607/thread/5868a6da/
Try to change quality and latency related settings. Under "Configure -> Settings -> Audio Input -> Compression": - decrease Quality and/or - increase "Audio per packet" (a higher value means less traffic but more latency) I am not sure if the following could be related to lagging voice, but you could also disable/enable "Configure -> Settings -> Network -> Use …
Minimum bandwidth settings? - Usage - Mumble forums
https://forums.mumble.info/topic/1937-minimum-bandwidth-settings/
Every packet we send has a header in it that's a fixed size. 10ms audio per packet will send four times as many headers as a 40ms packet. Dragging the quality slider all the way down and looking at the actual bitrates Mumble shows, it looks like 10ms audio-per-packet at 8kbps Speex is double the bandwidth of 60ms APP at 8kbps Speex.
Remove bandwidth/bitrate limit · Issue #3895 · mumble …
https://github.com/mumble-voip/mumble/issues/3895
If you wanted to make the default bandwidth setting the highest that Opus (and Mumble) supports with 10 ms audio per packet, then it would be 558000 = 510000 + 9600 + 38400. Opus can use down to 2.5 ms frame sizes and up to 255 audio channels, which I assume would have a larger overhead, but Mumble currently does not support that.
Now you know Mumble Audio Per Packet
Now that you know Mumble Audio Per Packet, we suggest that you familiarize yourself with information on similar questions.
