We have collected the most relevant information on No Audio On Incoming Calls Asterisk. Open the URLs, which are collected below, and you will find all the info you are interested in.
No Sound on External SIP in Asterisk|FreePBX
https://www.sysfix.co.uk/Blog/No-sound-on-external-sip-asterisk.html#:~:text=SIP%20One%20Way%20Audio%20Troubleshooting%20Once%20these%20ports,to%20the%20correct%20IP%20of%20the%20Asterisk%20Server.
No sound on incoming calls - Asterisk Support - Asterisk ...
https://community.asterisk.org/t/no-sound-on-incoming-calls/24607
Here’s the strange problem. I’ve set up Asterisk to connect to Broadvoice as the trunk, and then I have a SIP phone here on my desk which connects to Asterisk. I’ve set up a dialplan on Asterisk so that my SIP phone here goes into a context called staff. From within that context, it can dial out through the Broadvoice SIP line. It works fine. I can dial out and get good …
No Incoming Call Audio - Asterisk Support - Asterisk Community
https://community.asterisk.org/t/no-incoming-call-audio/73306
After some troubleshooting, I noticed that the calls actually were connecting in the logs. I set the default incoming call extension to a single phone, and the call goes through with 2-way audio (although the calling party does not hear any ringing on their end, just silence until the called party picks up). If the called party does not pick up ...
No audio when transfering incoming calls - Asterisk ...
https://community.asterisk.org/t/no-audio-when-transfering-incoming-calls/49104
Hello, I am running asterisk 12.0.0 on a server hosted by online.net (no NAT) with an OVH SIP line. Incoming and outgoing calls are working well, even simultaneously. My problem arises when transfering incoming calls to an external phone line. The communication is well established (ring + answer) but there is no audio. For the transfer, I simply use a dial function in …
No audio on Asterisk SIP call - Stack Overflow
https://stackoverflow.com/questions/5554837/no-audio-on-asterisk-sip-call
2) Not answered calls: in your dialplan (/etc/asterisk/extensions.conf) you need to answer calls before they can send any audio (RTP), make sure every call runs through an Answer(). 3) Multiple answers in a single call: a call can be answered only a single time, in some asterisk versions you won't receive audio if a call is answered twice or more times so make sure you don't.
[SOLVED i.e. the problem never existed...] PJSIP with no ...
https://community.asterisk.org/t/solved-i-e-the-problem-never-existed-pjsip-with-no-audio-on-out-and-incoming-calls/78546
Hi! I started to use pjsip to connect to a SIP trunk (German Telekom). Internal calls are no problem. In- and outgoing signalling is also no problem, but there is no audio with these calls. The trunk is a bit special as it uses tcp for SIP, a proxy, and requires NAPTR and SRC to work for the name resolutions. My PBX is a bit special as it is sitting on the router and it sees …
No audio on inbound or outbound calls - General Help ...
https://community.freepbx.org/t/no-audio-on-inbound-or-outbound-calls/47303
I am running FreePBX with Asterisk version 15.1.5. I am using an old ObiHai 110 device as an FXO port and a Gigaset C530IP DEC station as a PJSIP extension. Both devices register with PBX and calls can be made and received but there is no audio in either direction. When calling the extension’s voicemail, the logs show that the proper audio files are played by …
No sound for some incoming calls - Distro Discussion ...
https://community.freepbx.org/t/no-sound-for-some-incoming-calls/23946
Check the Asterisk SIP Settings Module and make sure you have the NAT, External IP, and internal IP addresses set correctly. Make sure you have directmedia=no in the PEER details of your trunk. If your extensions are on the same network as your FREEPBX, make sure NAT=NO is set in the Extension Module settings for each extension.
Ports forwarded, but no incoming calls? - Asterisk Support ...
https://community.asterisk.org/t/ports-forwarded-but-no-incoming-calls/64942
I having a regular problem with my RasPBX (Asterisk 11.21.0, FreePBX 12.0.76.2) box for incoming calls. Outgoing calls work fine. The RasPBX box is behind NAT (BT Home Hub with ports 5060,5061 and 10000-20000 forwarded. SIP trunk provider is Voipfone. One of two things happens. Either caller hears American female voice: “The number you have dialled is not …
No audio on softphones, but rings - Endpoints - FreePBX ...
https://community.freepbx.org/t/no-audio-on-softphones-but-rings/65494
If you still have trouble, at the Asterisk command prompt, type sip set debug peer xxx where xxx is the extension number. Make a failing test call, paste the relevant section of the Asterisk log at https://pastebin.freepbx.org and post the link here. Also, report whether the desk phone user can hear the softphone user, and vice-versa.
Now you know No Audio On Incoming Calls Asterisk
Now that you know No Audio On Incoming Calls Asterisk, we suggest that you familiarize yourself with information on similar questions.
