We have collected the most relevant information on No Audio On Remote Sip Phones. Open the URLs, which are collected below, and you will find all the info you are interested in.
Remote SIP, no audio when using asterisk - Asterisk
https://forums.whirlpool.net.au/archive/925040#:~:text=The%20general%20problem%20with%20the%20no%20audio%20on,end%20of%20your%20SIP%20configuration%20it%20wont%20work.
SOLVED: No audio on remote extension - General Help ...
https://community.freepbx.org/t/solved-no-audio-on-remote-extension/38501
Your remote phone is not providing the correct address for your RTP connection. Your local server isn’t getting any of the audio the other phone is sending. If you’re forwarding all traffic from 10000-20000 UDP ports to the phone server, then you should be seeing audio traffic coming in from the remote phone.
Troubleshooting Remote SIP - IPitomy Wiki
https://wiki.ipitomy.com/wiki/Troubleshooting_Remote_SIP
Remote phone rings, answer, no one there, no audio at all. Caller continues to hear ringing. It has come to our attention that some routers use the default ports set in the phone for RTP (1000-1012). We have also seen this happen at sites with certain ISP modem/routers (Comcast & Time Warner for sure).
How to troubleshoot one-way / no audio issues - Cisco ...
https://community.cisco.com/t5/collaboration-voice-and-video/how-to-troubleshoot-one-way-no-audio-issues/ta-p/3164442
How to check really quick if the phones are sending / receiving RTP (audio). * Open the web page for 2 test phones, then click the 'stream 1' link located at the left handed side of the page, and check if the IP address and port match the information on both sides, keep pressing the 'stream 1' link and you will notice that the Tx and Rx stats keep increasing.
Solved: No audio at remote sites - Cisco Community
https://community.cisco.com/t5/ip-telephony-and-phones/no-audio-at-remote-sites/td-p/2372311
- All remote users can call the office using local extensions fine and the sound works both ways just fine but if a remote user calls another remote user then there is no audio at all. We have to use external DDI to call from one site to another which works fine.
No Audio - Remote SIP DECT - Telephone System Installers ...
https://sundance-communications.com/forum/ubbthreads.php/topics/558251/No_Audio_-_Remote_SIP_DECT
It almost HAS to be ports that should be open and are not. If it's registered correctly but no audio either way---then it's got to be the ports. Make double sure you have ALL of the correct ones open on all routers. This is one of the frustrating parts about remote phones--sometimes the routers just don't want to cooperate.
How to resolve one-way or no-way audio on VoIP calls
http://info.teledynamics.com/blog/how-to-resolve-one-way-or-no-way-audio-on-voip-calls
In particular, NAT is a common cause of one-way and no-way audio on VoIP calls. In this article, we dive into how NAT can impair voice sessions, cite some common symptoms that indicate NAT may be at the root of your call audio problems, and address how to resolve the issues. Signs that NAT could be the issue.
IP Office 500 - No audio on remote IP Phone - Avaya: IP ...
https://www.tek-tips.com/viewthread.cfm?qid=1802114
IP Office 500 - No audio on remote IP Phone IP Office 500 - No audio on remote IP Phone treyivy (TechnicalUser) (OP) 10 Apr 20 00:41. Hi Everyone, I have been working on this for about 3 weeks and have read all kinds of post and still can't figure it out. I am trying to get a remote IP extension via a VPN tunnel to work.
How to troubleshoot one-way and no-way audio on VoIP …
http://info.teledynamics.com/blog/how-to-troubleshoot-one-way-and-no-way-audio-on-voip-calls
SIP ALG is a firewall setting that can either be enabled or disabled -- generally, the audio issues occur when it's enabled. (3) Incompatible Codecs. When a VoIP call is initiated between two phones, they negotiate and choose a codec that is available to both devices.
NO AUDIO ON REMOTE EXTENSIONS - UCM6202 - …
http://forums5.grandstream.com/t/no-audio-on-remote-extensions-ucm6202/18610
The public IP is added in the field Settings/SIP/NAT/ External host. NATbox is checked under extension settings. “Use address in SDP” field also didn’t helped. The remote extension use the public IP to register (successfully). At that point, remote extension can register, place and recieve calls but with no audio.
Remote SIP, no audio when using asterisk - Asterisk
https://forums.whirlpool.net.au/archive/925040
The general problem with the no audio on remote extensions with asterisk is where you put the sip nat settings. Most people put it in the sip_nat.conf file but as these settings would be added at the very end of your SIP configuration it wont work. Some machines it …
Now you know No Audio On Remote Sip Phones
Now that you know No Audio On Remote Sip Phones, we suggest that you familiarize yourself with information on similar questions.
