We have collected the most relevant information on Nxp I2s Audio Codec. Open the URLs, which are collected below, and you will find all the info you are interested in.
AN12202: Using Synchronous Audio Interface (SAI) …
https://www.nxp.com/docs/en/application-note/AN12202.pdf
A serial protocol (I2S) specially for digital audio applications was developed to standardized communication between IC manufacturer and audio processing units. The I2S bus has three lines: • Continuous Serial clock (SCK), Bit Clock (BCLK) • Word Select (WS), Frame Sync (FS), Word Clock (WCLK), Left-Right Clock (LRCLK)
UDA1342TS Audio CODEC - NXP
https://www.nxp.com/docs/en/data-sheet/UDA1342TS.pdf
NXP Semiconductors Product specification Audio CODEC UDA1342TS 1 FEATURES General •2.7 to 3.6 V power supply •5 V tolerant digital inputs •High pin compatibility with UDA1341TS •24 bits data path •Selectable control via L3-bus interface, I2C-bus interface or static pin control; choice of 2 device addresses in L3-bus and I2C-bus mode
Audio Output Options for Kinetis - NXP
https://www.nxp.com/docs/en/application-note/AN4369.pdf
audio codec IC through the I2S audio bus. The Kinetis MCU family supports the FlexTimer peripherals, providing several PWM outputs, 12-bit DAC converters, and a specialized I2S peripheral audio bus interface compatible with an external audio codec IC. As mentioned above, the audio output peripheral options for Kinetis devices are: • DAC (12-bit)
[imx8mp] porting audio codec ssm2518 - NXP Community
https://community.nxp.com/t5/i-MX-Processors/imx8mp-porting-audio-codec-ssm2518/m-p/1402307
SAI - Codec SAI3_TXC <-> BCLK(I2S Bit Clock.) SAI3_TXFS <-> LRCLK(I2S Word Clock.) SAI3_MCLK <-> MCLK(Serial Audio Interface Master Clock.) SAI3_TXD <-> SDAT(I2S Serial …
Emulating I2S bus on KE06 - NXP
https://www.nxp.com/docs/en/application-note/AN5325.pdf
Emulating I2S bus on KE06, Application Notes, Rev. 0, 08/2016 4 NXP Semiconductors The FRDM-KE06Z is official released FRDM development platform for Kinetis KE06 MCUs. It enables easy access to MCU I/O. The TWR-AUDIO-SGTL is a peripheral module compatible with the NXP® Tower® System and features the SGTL5000 audio codec.
SGTL5000 | Ultra-Low-Power Audio Codec | NXP …
https://www.nxp.com/products/audio-and-radio/audio-converters/ultra-low-power-audio-codec:SGTL5000
Overview. The SGTL5000 is a low-power stereo codec designed to provide a comprehensive audio solution for portable products that require line-in, mic-in, line-out, headphone-out and digital I/O. Featuring: Ultra-low-power with very high performance and functionality. Capless headphone and an integrated PLL to allow clock reuse within the system that helps achieve a lower overall …
Now you know Nxp I2s Audio Codec
Now that you know Nxp I2s Audio Codec, we suggest that you familiarize yourself with information on similar questions.
