We have collected the most relevant information on Ps3 Audio Optical Bitstream. Open the URLs, which are collected below, and you will find all the info you are interested in.
How to make the audio settings on your PlayStation 3 ...
https://www.digitaltrends.com/home-theater/demystifying-the-audio-settings-on-your-playstation-3/
In order to set LCPM up correctly, head into the PS3 XMB interface and select “Settings”, then “Video Settings.” Under “BD/DVD Audio Output Format …
PS3™ | Audio Output Settings
https://manuals.playstation.net/document/en/ps3/current/settings/audiooutput.html
To output Dolby Digital or DTS® audio, you must connect the PS3™ system and the audio device using a digital optical cable and switch to [Optical Digital] under [Audio Output Settings]. If a device that is not compatible with the HDCP (High …
PS3 - DTS-HD - Dolby TrueHD - Bitstream - LPCM | AVForums
https://www.avforums.com/threads/ps3-dts-hd-dolby-truehd-bitstream-lpcm.749130/
Bitstream or Linear PCM? Use HDMI with Linear PCM . That way the PS3 does all the decoding and passes the HD Audio to your amp as Linear PCM (Just as good as Bitstream). Unfortunately due to hardware limitations in the HDMI chip the PS3 uses it is very unlikely that we will ever see Bitstream support for the HD Audio Codecs.
PS3 Audio: LPCM or Bitstream - NeoGAF
https://www.neogaf.com/threads/ps3-audio-lpcm-or-bitstream.424819/
If you have just switch the PS3 from a T.V to the surround system you might want to check the audio setting on the PS3 and make sure that 5.1 and 7.1 settings are checked. I don't have that much knowledge on the subject but I thought that bit-stream was for optical connections while LPCM was for hdmi. Trojita Rapid Response Threadmaker Feb 9, 2009
Bitstream or PCM, PS3 or Receiver? | AVS Forum
https://www.avsforum.com/threads/bitstream-or-pcm-ps3-or-receiver.1320428/
With this option set to "ON" the PS3 audio will be simutaneously output on multiple outputs (e.g., HDMI and optical).[/list]In most cases you should set your PS3 to output Bitstream if you are using an optical digital connection (i.e., Toslink) from the PS3 to your Audio/Video Receiver (AVR), and you should set it to LPCM if you using a HDMI ...
No Sound from My PS3's Optical Digital Output - Why ...
https://www.bigpicturebigsound.com/ps3-optical-no-sound-1439.shtml
Audio Output Settings" - select Digital Out (optical). Also, under "BD/DVD Settings" in the PS3 settings menu make sure the Optical Digital Output is set to "bitstream" not to "PCM." This will pass the Dolby Digital and DTS soundtracks to your receiver for …
Now you know Ps3 Audio Optical Bitstream
Now that you know Ps3 Audio Optical Bitstream, we suggest that you familiarize yourself with information on similar questions.
