We have collected the most relevant information on Ps3 Audio Setup Receiver. Open the URLs, which are collected below, and you will find all the info you are interested in.
PS3™ | Audio Output Settings
https://manuals.playstation.net/document/en/ps3/current/settings/audiooutput.html
2. Select (Settings) > (Sound Settings). 3. Select [Audio Output Settings]. 4. Select the input connector on the audio device. Channel numbers and audio formats that are supported vary depending on the connector in use. Input connectors on the TV or AV amplifier (receiver) PS3™ system output connectors.
How to make the audio settings on your PlayStation 3 ...
https://www.digitaltrends.com/home-theater/demystifying-the-audio-settings-on-your-playstation-3/
In order to set LCPM up correctly, head into the PS3 XMB interface and select “Settings”, then “Video Settings.” Under “BD/DVD Audio Output Format (HDMI),” switch the stream from Bitstream to...
How do i set up my PS3 to send audio to my receiver via ...
https://forums.anandtech.com/threads/how-do-i-set-up-my-ps3-to-send-audio-to-my-receiver-via-toslink.254215/
I have a PS3 w/ HDMI out to tv, and want to have the optical audio out to go to my receiver. I have a 2.0 setup w/ my Pioneer elite vsx-90txv receiver. (im cheap yes i know) I am not sure whether my toslink cable is broken or not, but when i connect the cable to my ps3, i see a red light on the other side, so i assume that it's not messed up.
No sound through receiver from PS3 | Home Theater Forum ...
https://www.hometheatershack.com/threads/no-sound-through-receiver-from-ps3.15376/
The HDMI inputs only pass the video signal to the TV monitor. The Other option can be selected in HDMI SET in the receivers Manual Setup Menu. This will enable the receiver to pass the audio signal straight through to the TV. Pleases refer to the owners manual for specific details regarding the HDMI settings.
PS3 to Reciever setup - Audioholics Home Theater Forums
https://forums.audioholics.com/forums/threads/ps3-to-reciever-setup.63957/
In the PS3's audio output settings you may opt to do one of two things. Allow it to configure the audio on it's own while the receiver and television are on or set the PS3 to output 7.1 LPCM as well as standard 2 channel PCM, Dolby Digital, and …
FAQ: Setting up a PS3 to an Onkyo amp - AVForums
https://www.avforums.com/threads/faq-setting-up-a-ps3-to-an-onkyo-amp.696423/
Turn on your PS3 On the fat PS3:-Select Sound Settings Select HDMI Select AUTO Check that all the DD, DTS and a number of PCM (all the way up to 7.1) are ticked. Save the settings Go to the BD/DVD settings Select audio output format as PCM and save the settings. On the slim PS3:-Select Sound Settings Select HDMI Select AUTO
No Surround Sound With PS3 : hometheater
https://www.reddit.com/r/hometheater/comments/sggyw3/no_surround_sound_with_ps3/
The reason I don’t have the PS3 connected directly to the receiver is, for some reason I haven’t been able to figure out, whenever I play a PS2 game on it, the game audio plays, but there’s also a static sound with it. If I switch the sound mode on the receiver and then switch it back, the static sound goes away.
ONKYO AVR AV Home Cinema Receiver - OSD Setup of PS3 (New ...
https://www.youtube.com/watch?v=Sa_T3V5xC1E
How to setup your Slim PS3 to get best possible audio and picture quality when connected to your Onkyo AV Receiver.
r/PS3 - How I solved my PS3 Netflix audio/surround sound ...
https://www.reddit.com/r/PS3/comments/2rvd51/how_i_solved_my_ps3_netflix_audiosurround_sound/
My TV only has a digital optical output for audio (Toslink), and my receiver has RCA inputs, so I purchased a converter. To summarize, this was my setup: PS3 --> (HDMI) --> TV --> (Toslink) --> Converter --> (RCA) --> Receiver --> (Speaker cable) --> Speakers.
No Sound from My PS3's Optical Digital Output - Why ...
https://www.bigpicturebigsound.com/ps3-optical-no-sound-1439.shtml
The PS3 does not support simultaneous analog and digital audio output. You have to select one or the other in order for it to work. The specific setting you need is in "Settings... Sound Settings... Audio Output Settings" - select Digital Out (optical). Also, under "BD/DVD Settings" in the PS3 settings menu make sure the Optical Digital Output is set to "bitstream" not …
Now you know Ps3 Audio Setup Receiver
Now that you know Ps3 Audio Setup Receiver, we suggest that you familiarize yourself with information on similar questions.
