We have collected the most relevant information on Pulseaudio Device Names. Open the URLs, which are collected below, and you will find all the info you are interested in.
Pulseaudio device names - OZ9AEC Website
https://oz9aec.net/software/gstreamer/pulseaudio-device-names#:~:text=The%20pulseaudio%20device%20name%20is%20then%20the%20weird,grep%20%27Name%3A%20%27%20%7C%20cut%20-d%22%20%22%20-f2
Pulseaudio device names - OZ9AEC Website
https://oz9aec.net/software/gstreamer/pulseaudio-device-names
According to the pulsesrc documentation, one can also use the “device-name” property, which should be a human readable name but I have no idea what this name is. A final note about recording the output from other applications. To get a list of all monitor type sources we can use: pactl list | grep -A2 'Source #' | grep 'Name: .*\.monitor$' | cut -d" " -f2. This was also …
Confusing Pulseaudio device names. · Issue #3652 ...
https://github.com/raspberrypi/linux/issues/3652
device.profile.name = "analog-mono" device.profile.description = "Analog Mono" device.description = "Built-in Audio Analog Mono" alsa.mixer_name = "Broadcom Mixer" module-udev-detect.discovered = "1" device.icon_name = "audio-card" What matters in pavucontrol is the device.description which does not differentiate them If the name could contian HDMI vs …
PulseAudio/Examples - ArchWiki
https://wiki.archlinux.org/title/PulseAudio/Examples
Names like "CM106 Like Sound Device" are not very descriptive. This can be easily fixed and it works for both Pulseaudio sources and sinks. The easiest method is to add the following lines to the end of the /etc/pulse/default.pa file. To update a source name: update-source-proplist <DEVICE_NAME> device.description="<NEW_NAME>"
udev - How to name Pulseaudio USB devices by physical ...
https://unix.stackexchange.com/questions/564622/how-to-name-pulseaudio-usb-devices-by-physical-location-in-usb-tree
In this mailing list post from 2016, a Pulseaudio user asks how to assign stable names to different USB audio cards which may have identical vendor and serial numbers.. He posted his solution on GitHub; it is based on adding a Udev line for each card, based on the card's device path.. I'm trying to modify this solution so that I can add new cards without changing the …
DeviceNames - AlsaProject
https://www.alsa-project.org/wiki/DeviceNames
This is the recommended device name for most applications. The default device will usually use Pulseaudio or dmix (TODO: confirm that dmix really is used also for capture), which ensures that your application won't prevent other audio applications from working at the same time, in case the hardware doesn't support multiple simultaneous capture streams.
L.G.C. How-To: Rename PulseAudio Devices – LinuxGameCast
https://linuxgamecast.com/2017/12/l-g-c-how-to-rename-pulseaudio-devices/
1. Launch paman and track down the outputs (Sinks) or inputs (Sources) that you plan on changing. 2. Replace YOURDEVICE with with the business paman spits out and change NEWDEVICENAME to whatever you want. Sink example: This will change the name for the device output. pacmd update-sink-proplist YOURDEVICE device.description=NEWDEVICENAME.
PulseAudio from the Command Line - Shallow Sky
https://shallowsky.com/linux/pulseaudio-command-line.html
$ pacmd list-sinks | grep -e name: -e index -e description -e muted index: 1 name: device.profile.description = "HDMI3/DP3 Output" device.description = "Cannon Point-LP High Definition Audio Controller HDMI3/DP3 Output" index: 2 name: device.profile.description = "HDMI2/DP2 Output" device.description = "Cannon Point-LP High Definition Audio Controller …
Modules – PulseAudio
https://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/Modules/
PulseAudio can stream audio data to products that support the RAOP protocol. module-raop-discover. mDNS/DNS-SD Service Discovery of RAOP devices. module-raop-sink. The main module used to create a virtual output device which pipes all audio to the RAOP device. sink_name The name of the sink (see Modules) server The server to connect to
audio - Change what PulseAudio calls a device? - Unix ...
https://unix.stackexchange.com/questions/316067/change-what-pulseaudio-calls-a-device
To improve upon dirkt's answer, due to the way shell arguments are interpreted, spaces in PulseAudio properties such as the description require double quoting: pacmd 'update-sink-proplist alsa_output.my-card.analog-stereo device.description="My Card" '. To run a command automatically on every login, you can append it to your PulseAudio startup ...
Now you know Pulseaudio Device Names
Now that you know Pulseaudio Device Names, we suggest that you familiarize yourself with information on similar questions.
