We have collected the most relevant information on Pulseaudio Dts. Open the URLs, which are collected below, and you will find all the info you are interested in.
Getting DTS 5.1+ sound via S/PDIF or HDMI using PulseAudio ...
https://blogs.gentoo.org/mgorny/2021/07/25/getting-dts-5-1-sound-via-s-pdif-or-hdmi-using-pulseaudio/
Getting DTS 5.1+ sound via S/PDIF or HDMI using PulseAudio While PCs still usually provide a full set of analog jacks capable of outputting a 5.1 audio, other modern hardware (such as TVs) is usually limited to digital audio outputs (and sometimes analog outputs limited to stereo sound). These outputs are either S/PDIF (coaxial or optical) or HDMI.
DTS Pulseaudio (dcaenc) - Community Help Wiki
https://help.ubuntu.com/community/DTS%20Pulseaudio%20%28dcaenc%29
The following script does the steps outlined in the rest of the document. It has only been tested on Ubuntu 14.04. Warning though, do not run it twice since you'll end up inserting same stuff to asound.conf and PulseAudio default.conf twice. Download and run script. chmod +x ./DTSPulseaudioInstaller sudo ./DTSPulseaudioInstaller.
PulseAudio - Official Kodi Wiki
https://kodi.wiki/view/PulseAudio
PulseAudio can be run in one of two modes these are: Passthrough Mode Used if you want to passthrough (bitstream) AC3, DTS, and EAC3 to an AVR or other device. In order to allow passthrough to work with PulseAudio then it MUST be set to use a 2.0 channel configuration, despite the 2.0 setting this will still allow 5.1 audio from AC3, DTS, and EAC3.
PulseAudio 13 Released with Dolby TrueHD and DTS-HD Master ...
https://news.softpedia.com/news/pulseaudio-13-released-with-dolby-truehd-and-dts-hd-master-audio-support-more-527422.shtml
PulseAudio 13 Released with Dolby TrueHD and DTS-HD Master Audio Support, More PulseAudio 13 released PulseAudio, the open-source sound system/server used by numerous Linux-based operating systems...
20.04 - PulseAudio not passing AC3/DTS, downmixing to ...
https://askubuntu.com/questions/1364432/pulseaudio-not-passing-ac3-dts-downmixing-to-stero
I've been researching how to get Pulseaudio to pass AC3/DTS directly to my sound system but just can't seem to make it work. So watching movies with AC3 5.1 in a web browser (Plex, Netflix, etc), all get down mixed by Pulseaudio to two channel PCM. I've tried the steps posted on the Help Ubuntu: DigitalAC-3Pulseaudio and that didn't help.
PulseAudio 13.0 Released With Dolby TrueHD and DTS-HD ...
https://www.phoronix.com/scan.php?page=news_item&px=PulseAudio-13-Released
pulseaudio 13.0 brings meson build system support, it adopted the freedesktop.org code of conduct, passthrough support for dolby truehd and dts-hd master audio is now available, card profile selection support for alsa cards, support for the steelseries arctis 5 usb headset, new options, and a ton of other improvements with this pulseaudio sound …
PulseAudio 13.0 Released With Dolby TrueHD and DTS-HD ...
https://www.phoronix.com/forums/forum/software/desktop-linux/1126372-pulseaudio-13-0-released-with-dolby-truehd-and-dts-hd-master-audio-support
Phoronix: PulseAudio 13.0 Released With Dolby TrueHD and DTS-HD Master Audio Support While PipeWire may be seeing a lot of investment by Red Hat for improving audio/video streams on Linux, PulseAudio isn't letting up yet as the de facto Linux desktop sound server.
Now you know Pulseaudio Dts
Now that you know Pulseaudio Dts, we suggest that you familiarize yourself with information on similar questions.
