We have collected the most relevant information on Pulseaudio Network Zeroconf. Open the URLs, which are collected below, and you will find all the info you are interested in.
sharing pulseaudio devices over the network for sdr - awsh.org
https://awsh.org/sharing-pulseaudio-devices-over-the-network-for-sdr/
This will allow anonymous clients on the 10.1.1.0 network to connect to your pulseaudio server. For zeroconf publishing, start and enable the avahi-daemon systemd unit on both the client and the server. Then, on the server, edit /etc/pulse/default.pa and add: load-module module-zeroconf-publish. On the client, edit /etc/pulse/default.pa and add:
Pulseaudio network streaming - Will Price
http://www.willprice.dev/2013/05/10/pulseaudio-network-streaming.html
Add the following lines to /etc/pulse/default.pa. load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.0.0/24 auth-anonymous=1 load-module module-zeroconf-publish. The first line sets up a TCP server for pulseaudio allowing remote sound sources to be utilized (clients can be anonymous as well).
How to set up PulseAudio over Network · GitHub
https://gist.github.com/xarinatan/c415341ff34eab445cfb073988dcf6c1
On the server in /etc/pulseaudio/default.pa , add load-module module-zeroconf-publish; On the client in /etc/pulseaudio/default.pa , add load-module module-zeroconf-discover; Restart pulseaudio and avahi if needed. The remote speakers should now show up in volume control applets like that of KDE, Gnome, or pavucontrol and be selectable for output.
networking - How to set up PulseAudio remote properly …
https://unix.stackexchange.com/questions/470961/how-to-set-up-pulseaudio-remote-properly-and-securely
pacman -S pulseaudio-zeroconf systemctl enable avahi-daemon.service systemctl start avahi-daemon.service server steps. Edit /etc/pulse/default.pa and add these lines: load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.0.0/24 auth-anonymous=1 load-module module-zeroconf-publish Run these commands:
How to use pulseaudio for network stream with Raspbmc ...
https://itectec.com/unixlinux/how-to-use-pulseaudio-for-network-stream-with-raspbmc-kodi/
sudo apt-get install pulseaudio pulseaudio-module-zeroconf 2. Setting up pulseaudio. sudo nano /etc/pulse/default.pa I added the following lines: load-module module-native-protocol-unix auth-anonymous=1 load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.1.0/24 auth-anonymous=1 load-module module-zeroconf-publish 3. Start pulseaudio. First I tried to start …
PulseAudio/Examples - ArchWiki - Arch Linux
https://wiki.archlinux.org/title/PulseAudio/Examples
On both machines, the client and server, install the pulseaudio-zeroconf package. Start/enable avahi-daemon.service afterwards. On the server, add load-module module-zeroconf-publish to /etc/pulse/default.pa. On the client, add load-module module-zeroconf-discover to /etc/pulse/default.pa.
How-to set up network audio server based on PulseAudio …
https://blogs.gnome.org/ignatenko/2015/07/31/how-to-set-up-network-audio-server-based-on-pulseaudio-and-auto-discovered-via-avahi/
Let’s install them: # dnf install pulseaudio pulseaudio-module-zeroconf avahi. Nothing needs to be set up in avahi, so just start and enable daemon: # systemctl start avahi-daemon # systemctl enable avahi-daemon. module-native-protocol-tcp will use 4317/tcp port to handle connections, need to open port. 1.
Now you know Pulseaudio Network Zeroconf
Now that you know Pulseaudio Network Zeroconf, we suggest that you familiarize yourself with information on similar questions.
