Remote Wire Not Working Car Audio

We have collected the most relevant information on Remote Wire Not Working Car Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.

WTFFFFF PROBLEMS WITH REMOTE WIRE!!! - Electrical-battery ...

https://www.stevemeadedesigns.com/board/topic/143022-wtfffff-problems-with-remote-wire/#:~:text=If%20allelse%20fails%2C%20Try%20hooking%20the%20remote%20wire,that%20side%20that%20is%20closer%20to%20the%20accessory%3F

none

Remote Wire Not Working | Car Audio Forum | CarAudio.com

https://www.caraudio.com/threads/remote-wire-not-working.544805/

Mar 16, 2013. #4. Issue with the Head unit..needs repair, or replace it..only other thing I can think of thats is fairly simple,and can be done cheaply, is to run a toggle switch/30 amp if possible from the fuse panel for power, and to the remote wiring you have ran to the amp/amps,and cap off the one on the back of the Head unit,Id get one ...

Remote Turn On Wire: What it is and How to ... - MTX Audio

https://www.mtx.com/library-remote-turn-on

Next, reconnect the factory wire by inserting the other end into the open end of the butt connector and crimp. This will “tap into” the wire for the remote turn on but also reconnect the wire that was cut. We recommend wrapping all butt connector connections in electrical tape or heat shrink. WIRING REMOTE TURN ON TO A SWITCH

Head Unit Has No Remote Wire - Car Audio Help

http://www.caraudiohelp.com/newsletter/head_unit_no_remote_wire.html

A relatively common problem is installing an amplifier with a factory head unit or other head unit without a remote turn on wire (or a burned out circuit). So the amplifier doesn't stay on 24 hours a day you need a way to turn it on and off remotely. Hence the term "remote turn on wire". Almost every aftermarket head unit has a remote turn on wire.

Car Audio Amplifier Troubleshooting

http://www.caraudiohelp.com/newsletter/car_amp_troubleshooting.html

It should be around 12 volts. If it isn't change the head unit to the radio and see if it has voltage then. If it does you probably have the power antenna only lead connected instead of the remote turn on lead. If you do not have voltage in either case then …

Now you know Remote Wire Not Working Car Audio