We have collected the most relevant information on Rtcp Audio Interval Msec. Open the URLs, which are collected below, and you will find all the info you are interested in.
rtcp_audio_interval_msec - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/rtcp_audio_interval_msec
rtcp_audio_interval_msec Created by Ryan Harris, last modified on 2018.02.07 rtcp_audio_interval_msec integer Channel variable to set the interval in msec between each RTCP SR packet. setting the rtp_timer_name to none will create all sorts of undesired side effects with RTCP (packets not sent, RTCP autoadjust failing, etc.). No labels
RTCP - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/RTCP
RTCP can be configured on a per-session basis or for the entire SIP profile. Its transmission intervals can be set from between 100 ms to 5000 ms. Per Session Use the rtcp_audio_interval_msec and rtcp_video_internal_msec channel variables.
Internal Sip Profile — FusionPBX Docs documentation
https://docs.fusionpbx.com/en/latest/advanced/internal_sip_profile.html
rtcp-audio-interval-msec: 5000: False rtcp-video-interval-msec: 5000: False rtp-autofix-timing: false: False rtp-autoflush-during-bridge false: False rtp-hold-timeout-sec: 1800: True rtp-ip $${local_ip_v4} True rtp-rewrite-timestamps: true: False rtp-timeout-sec: 300: True rtp-timer-name: soft: True send-message-query-on-register True: False
6.2 RTCP Transmission Interval
https://www.freesoft.org/CIE/RFC/1889/15.htm
The calculated interval between RTCP packets is required to be greater than a minimum of 5 seconds to avoid having bursts of RTCP packets exceed the allowed bandwidth when the number of participants is small and the traffic isn't smoothed according to the law of large numbers.
Freeswitch inserting silence in RTP stream when …
https://github.com/signalwire/freeswitch/issues/735
After some further investigation, I discovered that rtcp-audio-interval-msec was set on FreeSWITCH 1 in my scenario. Removing this seems to have resolved the problem for me (as we are not using RTCP). However this may still be a bug for users who that are using this feature.
[Freeswitch-users] RTCP Keep Alive issue - hangup after 60 ...
https://freeswitch-users.freeswitch.narkive.com/9sXMijpp/rtcp-keep-alive-issue-hangup-after-60-seconds-of-silence
with rtcp_audio_interval_msec variable set to passthru to pass it across a call --> <param name="rtcp-audio-interval-msec" value="5000"/> or, set the rtcp_audio_interval_msec channel variable. See http://wiki.freeswitch.org/wiki/RTCP Post by Andy Ayers Hi, Have encountered a problem recently where the company responsible for
Call drop after 25 seconds - Cisco Community
https://community.cisco.com/t5/collaboration-voice-and-video/call-drop-after-25-seconds/ta-p/3121927
The following example uses the ip rtcp report interval command to set the reporting interval to 5000 milliseconds, and then the timer media-inactive command to set the multiplication factor to 10. The result is that calls detected as inactive for 50 seconds (5,000 milliseconds times 10) will be disconnected.
Now you know Rtcp Audio Interval Msec
Now that you know Rtcp Audio Interval Msec, we suggest that you familiarize yourself with information on similar questions.
