We have collected the most relevant information on Sdr-Iq Audio Problem. Open the URLs, which are collected below, and you will find all the info you are interested in.
Problem with SDRSharp &Win10 - RadioReference.com Forums
https://forums.radioreference.com/threads/problem-with-sdrsharp-win10.408843/#:~:text=If%20you%20click%20it%20there%20is%20a%20drop,a%20dongle%20it%20should%20let%20SDR%23%20start%20running.
https://groups.io/g/airspy/topic/sdr_i_q_output/76926099?20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,76926099
Select "IQ from Sound Card" as the Source. This will allow you to modify the samplerate under Audio. Under Audio change the samplerate from the default of "48000 smaple/sec" to say "192000 sample/sec" Select your normal IQ Source. Or you could quit out of SDR#, edit SDRSharp.exe.config (It is in the same folder as SDR#) and modify:
https://sdr-radio.groups.io/g/main/topic/audio_distortion_cannot/78716171?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,78716171
The audio spectrum of received signals on the WSJT-X waterfall appear mushy and poorly defined. Signals will not decode. Changed SDR to an SDR-IQ. Signals are clearly defined on the WSJT waterfall and all signals are decoded. Just loaded SDR Sharp with Airspy R2 and WSJT-X decoding fine...so the issue does appear to be with V3.
g4zfqradio - Soundcard SDR Basics, SDR Sharp
https://sites.google.com/site/g4zfqradio/connecting-soundcard-sdr-to-computer
Click the +Audio tab and select the input from the Softrock, other soundcard SDR or FCD. (Not required for the RTL) Select the output to the speakers. For crystal controlled SDRs select Other...
eHam.net
https://www.eham.net/reviews/view-product?id=6466
I am going to make up a t/r switch box to allow use of the sdr-iq as a receiver with the transmitters, the sdr-iq needs to be protected from high level rf and muted, a micro relay to ground the receiver antenna input and open the audio from the computer, right at the sdr-iq in a small box, and that should allow me to see my signal as it goes ...
Problem with SDRSharp &Win10 - RadioReference.com Forums
https://forums.radioreference.com/threads/problem-with-sdrsharp-win10.408843/
Select "IQ from sound card" then hit play. Even without a dongle it should let SDR# start running. Also check the input and output settings under the audio heading, but I am guessing you probably have. Y yzfoot Newbie Joined Feb 7, 2010 Messages 4 Location wamplers lake Jun 18, 2020 #5 Thanks for your suggestions.
Pi SDR IQ Plus
https://pi-sdr.com/index.php/pi-sdr-projects/pi-sdr-iq-plus
Pi SDR IQ Plus. Pi SDR IQ Plus, is a new interface designed to suit the specific SDR ADC/DAC requirements of Flex SDR1000 and Softrock/Ensemble or compatible homemade rigs. Also it is designed to work with a network connection giving versatile topology. That means the Pi SDR IQ interface will just sit happily with your rig and only an Ethernet cable connection is required to …
Sound quality problem with SDR# : RTLSDR - reddit
https://www.reddit.com/r/RTLSDR/comments/9nnn3w/sound_quality_problem_with_sdr/
The audio from SDR# is kind of distorted with a metallic sound. I also hear some spark sounds or "bird flock" every few seconds. That is a big problem because first it sounds like shit, second it prevents software like DSDplus and PDW to properly decode the audio : ( The audio problem ALMOST disappear ONLY if I put the sample rate at 0.25MSPS.
LAN-IQ SDR (Stand-alone SDR) - AFEDRI SDR
https://www.afedri-sdr.com/index.php/lan-iq-sdr
LAN-IQ SDR is based on same AFEDRI8201 integrated circuit, like AFEDRI SDR-Net , so you can get more information from AFEDRI SDR-Net description page:. Please see the picture below: There is short block diagram description: LPF - Low Pass Filter, in default configuration is using as anti-aliasing filter for from DC to ~35MHz (or any frequency located below Nyquist limit).
Now you know Sdr-Iq Audio Problem
Now that you know Sdr-Iq Audio Problem, we suggest that you familiarize yourself with information on similar questions.
