We have collected the most relevant information on Set Up A Pulseaudio Sink. Open the URLs, which are collected below, and you will find all the info you are interested in.
audio - How to set up a PulseAudio sink? - Raspberry Pi ...
https://raspberrypi.stackexchange.com/questions/8621/how-to-set-up-a-pulseaudio-sink
If you don't put a sink_name in, pulseaudio won't start. The sink refers to the sink name on the pi side, which then also needs a name; add a corresponding sink_name to the module-alsa-sink line in default.pa there: load-module module-alsa-sink device=hw:0,0 sink_name=bcm1 Start the server on both sides and presto...sort of.
alsa - Pulseaudio setting up sinks and sources for A2DP ...
https://unix.stackexchange.com/questions/468780/pulseaudio-setting-up-sinks-and-sources-for-a2dp-and-hfp-connections
In default.pa or system.pa -depending on which mode you use the pulseaudio with-, use set-default-source <source-name> and set-default-sink <sink-name> below the file. Also comment load-module module-switch-on-port-available and load-module module-switch-on …
PulseAudio/Examples - ArchWiki
https://wiki.archlinux.org/title/PulseAudio/Examples
Setup steps Connect your microphone and headphones and make sure PulseAudio is configured correctly for their use, for example in... First time only: Save the template script below to an executable file of your choice Find the names of your microphone... Save …
linux - Pulseaudio setting up sinks and sources for A2DP ...
https://stackoverflow.com/questions/52311637/pulseaudio-setting-up-sinks-and-sources-for-a2dp-and-hfp-connections
Pulseaudio setting up sinks and sources for A2DP and HFP connections. Ask Question Asked 3 years, 4 months ago. Active 2 years, 7 months ago. Viewed 2k times 0 I'm trying to set up A2DP+HFP profiles in an embedded board. Goal is to use pulseaudio 12.2, ofono 1.18, and bluez 5.41 in order to connect to a mobile phone and use A2DP, HFP profiles ...
How to change pulseaudio sink with "pacmd set-default …
https://askubuntu.com/questions/71863/how-to-change-pulseaudio-sink-with-pacmd-set-default-sink-during-playback
Usage: ./movesinks.sh <sink number>. #!/bin/bash echo "Setting default sink to: $1"; pacmd set-default-sink $1 pacmd list-sink-inputs | grep index | while read line do echo "Moving input: "; echo $line | cut -f2 -d' '; echo "to sink: $1"; pacmd move-sink-input `echo $line | cut -f2 -d' '` $1 done. Share.
Down the drain: The elusive ‘default’ PulseAudio sink ...
https://brokkr.net/2018/05/24/down-the-drain-the-elusive-default-pulseaudio-sink/
Down the drain: The elusive ‘default’ PulseAudio sink. There is no such thing as a default output device (or sink) in PulseAudio. It say so right there in the official documentation. There is something referred to as a fallback device which is used “if the stream has not been seen before”. Yet there is a configuration command called set ...
Add tutorial: setting-up Bluetooth - PulseAudio by ...
https://github.com/ev3dev/ev3dev.github.io/pull/24/files/50787e9fae767f4a8e5e1748c5bb70b40eb9f259
`UUID: Audio Sink` ### How to get PulseAudio working with Bluetooth **This should all be done as root** 1 Install pulseaudio: `apt-get install --no-install-recommends pulseaudio pulseaudio-module-bluetooth` 2 Create a systemd service for running pulseaudio as the pulse user. Save the following lines as `/etc/systemd/system/pulseaudio.service` ```
PulseAudio: Sound over the network | manurevah
https://manurevah.com/blah/en/p/PulseAudio-Sound-over-the-network
In /etc/pulse/default.pa I added (where 192.168.0.1 is the PulseAudio server): load-module module-tunnel-sink-new server=192.168.0.1 sink_name=Remote channels=2 rate=44100 This means that we let go of automatic discovery and tell the client where the server is. I consider this a workaround for what PulseAudio promises, but in practice this works well (you just need …
Now you know Set Up A Pulseaudio Sink
Now that you know Set Up A Pulseaudio Sink, we suggest that you familiarize yourself with information on similar questions.
