We have collected the most relevant information on Shorting Audio Plugs. Open the URLs, which are collected below, and you will find all the info you are interested in.
Shorting plugs – PS Audio
https://www.psaudio.com/pauls-posts/shorting-plugs/
On our preamplifiers, there is no measurable difference in noise levels with or without shorting plugs inserted. Part of the reason for this is that an unused input doesn’t go anywhere. The path for noise is so short and the potential noise so low as to be immeasurable. Still, shorting plugs and their use is a thing.
Shorting Plugs Part I - Manufacturing - Lounge Audio
https://www.loungeaudio.com/single-post/2017/09/24/shorting-plugs-part-i-manufacturing
Building Shorting Plugs at Lounge Audio: we use male RCA plugs to short out the phono stage input connection to ground. They are used …
RCA Shorting Plugs - High-End Audio Discussion Forum
https://forum.audiogon.com/discussions/rca-shorting-plugs
If the selector switch is not switched to the input/s that you have the shorting plugs on, it is an open circuit, and a shorting plug should have no effect on an open circuit as it is not connected to in your case the Autoformer, and in an active preamps case, to the input stage transistors. Cheers George. stringreen.
Shorting plugs.... - High-End Audio Discussion Forum
https://forum.audiogon.com/discussions/shorting-plugs
Input shorting plugs are cheap -- for single ended inputs buy the cheap Radio Shack jobs and solder a wire between hot and ground; $5 and 1/2 hour and no worries from open ended inputs. I saw an ad for very expensive rhodium plated ones from a very high end cable manufacturer. Pshaw!!! Use that money towards a Koestu, or other great cartidge!
Building an RCA Input Shorting Plug - Take Five Audio
https://www.takefiveaudio.com/contents/19-rcainputshortingplugs
Building an RCA Input Shorting Plug. For each pair of unused inputs you will need one pair of RCA's and (2) 470 Ohm resistors and a small amount of solder. We used Neutrik 352 G male RCA's and Cardas solder. Next use a pair of side cutters to …
Source for shorting plugs - the audio and hifi community
https://www.audiocircle.com/index.php?topic=120273.0
The kind that came with your TV, DVR, DVD player, etc. Cut the RCA ends off of one of those cables leaving two inches of wire attached to each plug. Get some wire strippers out and expose the positive and negative copper wires coming out of each RCA plug. Twist them together, no solder required.
Shorting Plugs | diyAudio
https://www.diyaudio.com/community/threads/shorting-plugs.178455/
Hello, I am about to make up some shorting plugs for the unused INPUTS on my little Stromberg-Carlson, ASR-333. Hopefully, this may help quiet things down even more. After much reading, I cannot come to a clear understanding of what would be …
Shorting Plugs: Keystone Electronics
https://www.keyelco.com/category.cfm/Plugs-Pins-Jacks-Sockets/Shorting-Plugs/id/470
Circuit Board Shorting Links and Jumpers. Insulated Jacks and Plugs. Non-Insulated Shorting Pins. Please select from the following Shorting Plug options.
Now you know Shorting Audio Plugs
Now that you know Shorting Audio Plugs, we suggest that you familiarize yourself with information on similar questions.
