We have collected the most relevant information on Snd-Usb-Audio Module Options. Open the URLs, which are collected below, and you will find all the info you are interested in.
Matrix:Module-usb-audio - AlsaProject
https://www.alsa-project.org/wiki/Matrix:Module-usb-audio
1 The module options for snd-usb-audio; 2 Introduction for Generic USB Audio Driver soundcard; 3 Quick installation. 3.1 Setting up modprobe and kmod support; 4 modules.conf. 4.1 Native devices; 4.2 Autoloading OSS/free emulation; 4.3 The .asoundrc file. 4.3.1 Software volume control; 5 Links
Usb-audio - Alsa Opensrc Org - Independent ALSA and …
https://alsa.opensrc.org/Usb-audio
Usb-audio Contents. 1 The module options for usb-audio; 2 Setting up modprobe and kmod support; 3 Notes; 4 Some jackd hints; 5 Tuning USB devices for minimal latencies; 6 Devices using snd-usb-audio driver. 6.1 Roland/Edirol EXR-3s with Linux 2.6; 6.2 Roland Juno-G synthesizer USB MIDI patch; 6.3 DSP-400 under Linux 2.6; 6.4 SB Audigy2 NX USB; 6.5 M-audio Audiophile USB
Advanced Linux Sound Architecture - Linux kernel
https://www.kernel.org/doc/html/v4.10/sound/alsa-configuration.html
Module snd-usb-audio¶ Module for USB audio and USB MIDI devices. vid Vendor ID for the device (optional) pid Product ID for the device (optional) nrpacks Max. number of packets per URB (default: 8) device_setup Device specific magic number (optional); Influence depends on the device Default: 0x0000 ignore_ctl_error
ALSA - Void Linux Handbook
https://docs.voidlinux.org/config/media/alsa.html
$ cat /proc/asound/modules 0 snd_hda_intel 1 snd_hda_intel 2 snd_usb_audio To set a different card as the default, edit /etc/asound.conf or the per-user configuration file ~/.asoundrc: defaults.ctl.card 2; defaults.pcm.card 2; or specify sound card module order in /etc/modprobe.d/alsa.conf: options snd_usb_audio index=0 Dmix
Now you know Snd-Usb-Audio Module Options
Now that you know Snd-Usb-Audio Module Options, we suggest that you familiarize yourself with information on similar questions.
