We have collected the most relevant information on Sony Str Dg510 Hdmi No Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
There is no sound when using a TV or audio system ... - …
https://www.sony.com/electronics/support/audio-components-receivers-amplifiers/str-dg510/articles/00020051
Perform a power reset on the TV and audio system Turn off both devices. Disconnect the power cords and HDMI cables from both devices. Leave the devices disconnected for two minutes. Reconnect the HDMI cable to the HDMI IN (ARC or eARC) input of the TV and the HDMI OUT (ARC or eARC) of the audio system. Connect the power cords to both devices.
Setup Question: Sony STR-DG510 (No Sound) | AVS Forum
https://www.avsforum.com/threads/setup-question-sony-str-dg510-no-sound.1570410/
I connected the Blu Ray player to the DG510, so I have video, but no audio. I know on this unit, the HDMI is video only, but I tried RCA cables for the audio and cannot get any sound . I also want the TV signal going through the DG510, but again no sound (even when connecting RCA outs from TV to DG510 and turning TV speakers off).
Sony DG510 HDMI Problems - AVForums
https://www.avforums.com/threads/sony-dg510-hdmi-problems.543509/
I have a question about connecting the HDMI to a Sony STR-DG510 receiver. I am using a DIRECTV HR-20 connected with HDMI on video 2 and optical cable for sound. I get sound but in picture connected this way. When I moved the hdmi cable to DVD port on the receiver I am able to get picture but no sound.
problems with sony str-dg 510 Reciever - No HDMI Audio ...
https://www.digitalhome.ca/threads/problems-with-sony-str-dg-510-reciever-no-hdmi-audio.83924/
This AVR doesn't handle audio via the HDMI input - the audio simply gets passed to the TV. You'll need to use the optical connection from the PS3 - which only allows for optical or HDMI, not both, so you'll need to switch back to optical in the PS3 menus. This was discussed in the following thread on the same AVR.
Support for STR-DG510 | Sony USA
https://www.sony.com/electronics/support/audio-components-receivers-amplifiers/str-dg510
PROTECT or PROTECTOR is flashing in the display of the home audio device. There is no picture when connecting a receiver to a TV using HDMI connections. Test if your remote control sends an infrared (IR) signal. How to troubleshoot if there is no …
The audio, video, or both goes out when using an HDMI ...
https://www.sony.co.uk/electronics/support/audio-components-receivers-amplifiers/str-dg510/articles/00044401
Follow these steps to troubleshoot why the audio, video, or both goes out when using an HDMI connection. NOTE: Because each of these steps represents a possible solution to this issue, check the audio or video status after completing each step to make sure that audio or video drop out is no longer occurring. Make sure that the cables are securely connected to all of the …
Now you know Sony Str Dg510 Hdmi No Audio
Now that you know Sony Str Dg510 Hdmi No Audio, we suggest that you familiarize yourself with information on similar questions.
