We have collected the most relevant information on Spa3102 No Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
SPA3102 - NO AUDIO both ways | 3CX Forums
https://www.3cx.com/community/threads/spa3102-no-audio-both-ways.12482/
The weird thing is that everything is ok the other way around ( When an extension or an external caller calls the SPA3102 ). The problem is only when SPA3102 calls internal extensions or external callees. Audio is NO GO on any side. I have searched trough various forums and tried all setup provided by the tutorials but nothing will do...
SPA3102 - no Dial tone and/or IVR - Cisco Community
https://community.cisco.com/t5/atas-gateways-and-accessories/spa3102-no-dial-tone-and-or-ivr/td-p/2525569
SPA3102 - no Dial tone and/or IVR Hello All! I've pulled out this unit from the box, haven't used for longer time. Today after I've configured I found out, that I have no dial tone and I can't reset this unit via IVR.
How to configure Linksys SPA3102 without a hassle | SIP ...
https://switch2voip.us/how-to-configure-linksys-spa3102/
The Linksys SPA3102 is a device similar to the Linksys PAP2/T line of devices in appearance and configuration. In addition to the similar appearance, the Linksys SPA3102 also adds extra features not present in the PAP2/T such as an FXO (Foreign Exchange Office: allowing you to use a normal PSTN line or PBX line for redundancy in case of an outage on your …
ADMINISTRATION GUIDE SPA2102, SPA3102, …
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/csbpvga/ata/administration/guide/ATA_AG_v3_NC-WEB.pdf
About the Streaming Audio Server 83 Configuring the Streaming Audio Server 85 Using the IVR with an SAS Line 86 Chapter 6: Configuring the PSTN (FXO) Gateway on the SPA3102 87 Connecting to PSTN and VoIP Services 87 How VoIP-To-PSTN Calls Work 88 One-Stage Dialing (SPA3102 and SPA8800) 88 Two-Stage Dialing (SPA3102) 89 How PSTN-To-VoIP Calls ...
Configure Cisco/Linksys SPA3102 for Trixbox or FreePBX FXS ...
https://www.stephenwagner.com/2012/03/02/configure-ciscolinksys-spa3102-for-trixbox-fxs-and-fxo/
I have several Spa3102 planted in EU and one here in the US. I would like to ask your help if doesn’t take up much of your time. I’ve tried to make as less changes on the setting form Callcentric to Trixbox, just in case I need to convert back. I was able to register all Spas to my box, but I’m getting one way or no audio on some of them.
Linksys SPA3102 Configuration and Review - Callcentric
https://www.callcentric.com/support/device/linksys/spa3102
GENERAL INFORMATION: The SPA3102 is a Linksys device, similar to the PAP2/T line of devices in appearance and configuration. In addition to the similar appearance the SPA3102 also adds extra features not present in the PAP2/T such as an FXO (Foreign Exchange Office: allowing you to use a normal PSTN line or PBX line for redundancy in case of an outage on your ISP...etc) …
Linksys 3102 for Dummies - Welcome to Fred's Shack
http://www.fredshack.com/docs/linksys_3102.html
By default the SPA 3000 has the RTP packet size set to 0.030. This causes some poor sound qualities at times coming from Asterisk sound files. Change this to 0.020 and sound quality is excellent; After an extensive reading on echo cancelization in Asterisk I figured out that if you reduced the SPA to PSTN gain the echo will go away.
Linksys SPA3102 - manual.cldpbx.com
http://manual.cldpbx.com/wp-content/uploads/2016/12/linksysSPA3102_En.pdf
2. Connect the network cable from your SPA3102 to your DHCP enabled modem / router OR connect the network cable from your modem to the SPA3102 WAN port and connect your PC via Ethernet cable to the LAN port of the SPA3102. 3. Connect an analog phone to the [Phone] port in the SPA3102. 4. Turn the power on. 5.
SPA3102 and MNF - Beep tone during calls - VoIP
https://forums.whirlpool.net.au/archive/1161882
The SPA3102 apparently has a bit of a histroy with this as well. Anyway the outcome of investigations in my case was that no matter what I changed DTMF settings to in the ATA, the problem remained. When I dialled through a different VSP set up as a gateway the problem did not appear.
Poor call quality using SPA3102 - MyNetFone
https://forums.whirlpool.net.au/archive/1353559
I have tweaked the SPA3102 a little more & I will see how it goes for a week or so. If i get a C470IP or C475IP I was going to sell my SPA3102 because that is my SIP ATA & I wouldn't need it anymore. But then I only have a direct connection to the internet into a 4 port switch, a Netgear FWG114P. No router.
Now you know Spa3102 No Audio
Now that you know Spa3102 No Audio, we suggest that you familiarize yourself with information on similar questions.
