We have collected the most relevant information on Tivo Audio Video Inputs. Open the URLs, which are collected below, and you will find all the info you are interested in.
Audio and Video are Out of Sync - TiVo
https://tivoidp.tivo.com/tivoCommunitySupport/s/article/Audio-and-Video-are-Out-of-Sync
If you are using an A/V receiver, both the audio and video should pass from the source (cable and/or satellite box) to the TiVo device, through the stereo or A/V receiver, and then to the TV. 2. Restart the DVR, TV, and A/V receiver if applicable. For instructions, go to How to Restart or Powercycle the DVR. 3. HDMI troubleshooting. Disconnect and reconnect the HDMI cables …
AUDIO AND VIDEO - TiVo
https://www.tivo.com/assets/pdfs/accessibility/Viewer_guide/09-Troubleshooting/Troubleshooting_13_AudioVideo.pdf
On a TiVo Roamio/Mini, select ‘Settings & Messages,’ select ‘Settings,’ then ‘Video,’ then ‘TV Aspect Ratio.’ † Check your TV’s owner’s manual for information about how it may be adding letterbox or side bars to the picture. THE AUDIO AND VIDEO ARE OUT OF SYNC. † The audio and video may re-sync if you change channels.
Audio and Video are Out of Sync - TiVo
https://support.tivo.com/articles/Troubleshooting/Audio-and-Video-are-Out-of-Sync
1. Check physical connections: a. Check the audio inputs on the stereo or A/V receiver – check the HDMI or Component cables and make sure they are secured. b. If you are using an A/V receiver, both the audio and video should pass from the source (cable and/or satellite box) to the TiVo device, through the stereo or A/V receiver, and then to the TV.
Audio and Video Issues: Troubleshooting - TiVo
https://support.tivo.com/articles/Troubleshooting/Audio-and-Video-Issues-Troubleshooting
Verify if the TV is in the right Input/Source. 4. If the TV says: No Signal, No Audio, or No Video, refer to the steps below. a. Reboot applicable devices: DVR and TV. b. Check physical connections: Disconnect HDMI from the TV and DVR. Swap ends and plug them back in.
Video input | TiVo Community Forum
https://www.tivocommunity.com/threads/video-input.296353/
Is there anyway to make the s video and audio input active when the tivo is just setup to be used with antenna input. I can can't seem …
TiVo Wiring Guide - Electrophobia
http://www.electrophobia.com/tivo/
the S-Video cables on the input side of the A/V Receiver and replace them with RCA composite video cables. Remove the S-Video cable from the receiver to the TV. Connecting a TiVo, a Cable-box, a VCR, a DVD, a LD, an A/V Receiver and a TV. With this setup you can record cable TV with the TiVo and the VCR
How to Set the Video Output Format on Your DVR - TiVo
https://support.tivo.com/articles/Installation_Setup_Configuration/How-to-Set-the-Video-Output-Format-on-Your-DVR
How to Set the Video Output Format on Your DVR. Printable View « Go BackGo Back
Now you know Tivo Audio Video Inputs
Now that you know Tivo Audio Video Inputs, we suggest that you familiarize yourself with information on similar questions.
