Tp6911 Audio Headset Linux | Audio-Digital.net

We have collected the most relevant information on Tp6911 Audio Headset Linux. Open the URLs, which are collected below, and you will find all the info you are interested in.

alsa - volume control quirk for Tenx TP6911 Audio Headset ...

https://raspberrypi.stackexchange.com/questions/120335/volume-control-quirk-for-tenx-tp6911-audio-headset

Bus 001 Device 002: ID 1130:f211 Tenx Technology, Inc. TP6911 Audio Headset With /etc/asound.conf. pcm.!default { type hw card 1 …

[SOLVED] Software mixing on ALSA+USB sound card - Arch Linux

https://bbs.archlinux.org/viewtopic.php?id=166358

I have cheap chinesse USB soud card. lsusb says its "Tenx Technology, Inc. TP6911 Audio Headset"After arch installation sound was working about 2-3 reboots. Then i googled and deleted pulseaudio, and sound randomly working or not after reboots. After a lot of research i got /etc/asound.conf like that:

USB\VID_1130&PID_F211 - TP6911 Audio Headset | Device Hunt

https://devicehunt.com/view/type/usb/vendor/1130/device/F211

12 rows

Fake CM108 USB Audio Devices | KI6ETL – Ham Radio Enthusiast

https://www.ki6etl.org/2021/04/fake-cm108-usb-audio-devices/

These old devices used a chipset (Tenx TP6911) designed for “headsets” and have a fairly poor ADC, with a max of 24 KHz resolution (pretty low). The C-Media 108 chipset has long been considered a decent value chipset, so I went to …

Audio device detection w/ pyaudio · GitHub

https://gist.github.com/mansam/9332445

Bus 001 Device 009: ID 1130:f211 Tenx Technology, Inc. TP6911 Audio Headset # cat d.py: import pyaudio: p = pyaudio.PyAudio() info = p.get_host_api_info_by_index(0) numdevices = info.get('deviceCount') #for each audio device, determine if is an input or an output and add it to the appropriate list and dictionary: for i in range (0,numdevices):

Now you know Tp6911 Audio Headset Linux