Trixbox No Audio On Incoming Calls

We have collected the most relevant information on Trixbox No Audio On Incoming Calls. Open the URLs, which are collected below, and you will find all the info you are interested in.

Trixbox no sound for incoming calls - gotalk

https://forums.whirlpool.net.au/archive/1509283

I am on goVoIP Aussie Pack using a trixbox. I have no problem calling out. Incoming call connects too, however there is no sound. Usually I would have thought it is relating to ports, but I have opened 5060-5070 and 8000-8010. Actually I even put the asterisk box in the DMZ, same thing. My settings are: Trunk ==== username=0943xxxx type=peer secret=LSIZOZL1

Solved: No audio on outgoing calls from Trixbox... - Cisco ...

https://community.cisco.com/t5/ip-telephony-and-phones/no-audio-on-outgoing-calls-from-trixbox-phones-connecting/td-p/1969388

The call sets up fine, and remains active until one party ends it, but there is no audio in either direction. Using "debug voip rtp" showed that indeed, the UC560 was receiving packets from both the Trixbox (192.168.92.9) and the SIP trunk provider (83.245.6.8x), but was not transmitting packets to either end point.

No audio on inbound calls - General Help - FreePBX ...

https://community.freepbx.org/t/no-audio-on-inbound-calls/41446

The incoming calls are not able to connect to your system through RTP, which indicates a problem with the UDP 10000-20000 ports on the external interface. Unless you are sending the external address to the server (which it doesn’t sound like you are doing), you will have to translate the address to get the traffic to communicate with the server inside your …

No audio on inbound or outbound calls - General Help ...

https://community.freepbx.org/t/no-audio-on-inbound-or-outbound-calls/47303

Both devices register with PBX and calls can be made and received but there is no audio in either direction. When calling the extension’s voicemail, the logs show that the proper audio files are played by the PBX, but no audio is received at the extension. The handset does indicate the correct number of new messages and I can leave new messa...

[SOLVED] No Sound Can Be Heard Only On Incoming Calls With ...

https://community.freepbx.org/t/solved-no-sound-can-be-heard-only-on-incoming-calls-with-freepbx-2-10-0-4/14035

alteredstate 2014-05-31 19:15:06 UTC #1. There is no sound on incoming calls only (the caller can hear us but we can’t hear them) however outbound calls work just fine and inter-office extension calling works just fine; also dialpad inputs do not work on the IVR as well.

Now you know Trixbox No Audio On Incoming Calls