We have collected the most relevant information on Trixbox No Audio Remote Extension. Open the URLs, which are collected below, and you will find all the info you are interested in.
SOLVED: No audio on remote extension - General Help ...
https://community.freepbx.org/t/solved-no-audio-on-remote-extension/38501
SOLVED: No audio on remote extension. after replacing (an old) Freebpx installation with 13, the remote extensions are able to register, intitiate calls, but there is no audio. During the call setup I can see a 401 error, and after a few seconds the line is dropped because no response from the external extension.
No audio for remote sites after switching from Trixbox to ...
https://community.freepbx.org/t/no-audio-for-remote-sites-after-switching-from-trixbox-to-freepbx/38757
I built a new Freepbx server around an Intel NUC to replace an aging Trixbox server and all phones which are on the same subnet as the server can hear audio between themselves but nobody at remote sites can hear audio in or out. The firewall is exactly the same between the two servers (they both have the same IP address so I only have one running at a time). The old …
Trixbox remote extension audio trouble - Asterisk
https://forums.whirlpool.net.au/archive/628506
I have the system all up and running fine with the internal extensions with Grandstream phones. I have one Grandstream remotely (at my home office. The rest are in the work office). My home (i.e. remote to the Trixbox, which is located at work) Grandstream registers and dials, but gets no audio either end. I have done (on the Trixbox) nat=yes.
TrixBox Free PBX Remote Extension - Asterisk PBX - Spiceworks
https://community.spiceworks.com/topic/276046-trixbox-free-pbx-remote-extension
There are 2 other channels being used for audio (RTP), but they appear to be working since the remote user can create and audio is heard both directions. If all else fails you may have to connect to the console of the trixbox server and login to asterisk with asterisk -rvvvvvv this will show you what is going on in asterisk. Once in the console have someone call …
Remote extension no audio using Cisco 7912g - Asterisk ...
https://community.asterisk.org/t/remote-extension-no-audio-using-cisco-7912g/34566
My local extension is 200 (ATA) and my remote CISCO 7912g is extension 400. The local IP of remote ext. is 192.168.0.4. I have tried to register the phone pointing it to mydyndns.com (my domain) and also to the actual external IP of Asterisk, with the same results. My extension has:
Remote Extension No audio/UNREACHABLE - Asterisk SIP ...
https://community.asterisk.org/t/remote-extension-no-audio-unreachable/71984
Hi Team, I have installed freePBX which comes in iso format within CentOS. I have static IP —> Firewall/Router—>PBX server architecture in my office. All sip extension are working fine with PSTN as well as extension to extension in local LAN.But when I am registering extension (remote extension) out of my network with static IP (Forwarded port UDP 5060, 10000-20000 …
Remote extension audio issue - Asterisk
https://forums.whirlpool.net.au/archive/1517314
Can anyone give me any help in working out what is going on with no audio on a Billion 7404 vgp as a remote extension with Trixbox 2.6, I have tried many options without success. It registers fine but no audio in either direction, it works fine from inside my network but when its traversing NAT it fails.
remote extension no audio issue | 3CX Forums
https://www.3cx.com/community/threads/remote-extension-no-audio-issue.14048/
Hi I'm trying to configure a remote extension for using it from home as if i'm in office... i have to say that before 3cx i used asterisk and the remote extension was working fine without problems, now with 3cx and "about" same configuration (same public ip, same codec, same port) i have no audio...
No audio on Asterisk SIP call - Stack Overflow
https://stackoverflow.com/questions/5554837/no-audio-on-asterisk-sip-call
Besides NAT problems I've also faced this issues on 3 cases: 1) Missconfigured parameter localnet: on /etc/asterisk/sip.conf make sure you set the network address for the phones. You can alos add multiple networks, for example: localnet=172.16.1.0/24 localnet=192.168.1.0/24
Solved: trixbox: no audio to/from/between extensions ...
https://www.experts-exchange.com/questions/24378546/trixbox-no-audio-to-from-between-extensions-outside-the-PBX-lan.html
trixbox: no audio to/from/between extensions outside the PBX lan. ramrom asked on 5/4/2009. Voice Over IP IP Telephony. ... 8/14/2012. I have a trixbox on my LAN. The first time I installed it I had success communicating with remote SIP phones. Then I reinstalled trixbox and now remote uses can't hear or be heard on any call they make or receive.
Now you know Trixbox No Audio Remote Extension
Now that you know Trixbox No Audio Remote Extension, we suggest that you familiarize yourself with information on similar questions.
