We have collected the most relevant information on Ts-530s Audio Mod. Open the URLs, which are collected below, and you will find all the info you are interested in.
mods.dk - Articles for Kenwood 'TS-530'
https://www.mods.dk/index.php?ModelId=524
Improved mic audio mods for TS-530/830. 24 Mar 2005. 11M mod for TS-530S. 06 Jun 2004. WARC TX enable for TS-530 series. 19 Jul 1998. QRO Modification to TS-830S, TS-530S. 19 Jul 1998. TS-530S Low Voltage Supply Optional Improvements.
Modifications for the Kenwood TS-530 - Radio mods
https://www.radiomods.co.nz/kenwood/kenwoodts530.html
TS-530S IF Unit Q2, Q7 Protection 8-25-83 High voltage transients at the receiver antenna can be felt in the ALC circuitry and cause a failure of IF unit transistors Q2 and Q7. Symptoms encountered bay be a loss of RX sensitivity, and or loss of S-Meter deflection. Add the surge suppressor to the AF unit (X49-1150-XX) between terminal FG
Tuning a Kenwood TS-530S for low power | QRZ Forums
https://forums.qrz.com/index.php?threads/tuning-a-kenwood-ts-530s-for-low-power.487501/
connect the qrp circuit to the ts-530's din socket's alc pin 6 and din plug ground, set the ts-530's meter switch to alc, set the mode witch to the proper sideband setting, key the transmitter through the digital software and adjust the sound card interface tx audio output until the alc meter just barely flickers above zero then adjust the sound …
Modifications for the Kenwood TS-830 - Radio mods
https://www.radiomods.co.nz/kenwood/kenwoodts830.html
connection with the QRO modification to the Kenwood radios TS830S, TS-530S and the TS-530SP. The problem occurs after many hours of long winded QSO's. seems that with the increase in the screen voltage from 210 to 300 volts, R37 on the RF unit (#X44-1360-00) heats up tremendously and will change it's value so greatly that even
TS-530 User Manual - IW2NMX
http://www.iw2nmx.it/Kenwood%20-%20Trio/TS-530S%20Instruction%20and%20Service%20Manuals/TS-530S%20Instruction%20Manual.pdf
1.1 KENWOOD TS-530 The TS-530 is highly sophisticated solid state Amateur band transceiver employing only three vacuum tubes. Operating on all Amateur bands between 1.8 and 29.7 MHz, this unit is constructed modularly. The TS-530 in- cludes many built-in features usually found as extras on other transceivers.
Amateur Radio Equipment Modifications - WB4HFN
http://www.wb4hfn.com/Modifications/KenwoodEquipment.htm
Receive audio mods to improve audio quality: TS-520: Service notes: TS-520S: CW frequency shift. Power supply failure, -6VDC. CW filter select control: TS-530S: Low voltage supply optional improvements. IF unit Q2-Q7 protection: TS-690S: Extend RF tuning range: TS-700A: Service notes on the power supply
Modifications for the Kenwood TS-830 - W4LAC
http://w4lac.net/files/pdf/Kenwood%20TS-830%20Modifications.pdf
Kenwood radios TS830S, TS-530S and the TS-530SP. ... (250 hz) and external audio (50 hz) seletivity. incidentally, i wonder how many repair facilities (including yours) are equipped to motor ... Here is an easy filter modification for the kenwood ts …
Copper Talk: 11m mod for Kenwood TS-830S
http://www.copperelectronics.com/discus4/messages/34/90895.html?1188502418
Actually, I found a much easier mod for the TS-530 and 830. You only have to lift 1 wire and the 29 position on the band switch becomes 27. Unless you just want it for sideband on 11 meters, to me it is not worth the trouble as it does not do AM. I …
Now you know Ts-530s Audio Mod
Now that you know Ts-530s Audio Mod, we suggest that you familiarize yourself with information on similar questions.
