We have collected the most relevant information on Using Rg59 For Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
RG-59U coax cable for audio interconnects? | Home Theater ...
https://www.hometheaterforum.com/community/threads/rg-59u-coax-cable-for-audio-interconnects.125749/#:~:text=While%20the%20bulk%20of%20audio%20cables%20use%2050,sets%20made%20with%20flexable%20mini-coax%20and%20use%20this.
RG-59/RG-6 Coaxial for Analog Audio Interconnect? - AVS …
https://www.avsforum.com/threads/rg-59-rg-6-coaxial-for-analog-audio-interconnect.1308003/
Has anyone use a pair of coaxial cable for analog audio usage? If yes, what is the pros and cons pls? Just finished made a coaxial digital audio cable using the free installation cable from a satellite tv provider. Tested result = Higher frequencies is …
RG-59U coax cable for audio interconnects? | Home Theater ...
https://www.hometheaterforum.com/community/threads/rg-59u-coax-cable-for-audio-interconnects.125749/
While the bulk of audio cables use 50 ohm coax, 75/RG6/RG59 coax works fine as well. Using 2 sets of component video cables would work fine for a SACD system. Personally, I'd hit the custom web sites and get them to sell you a 2 sets made with flexable mini-coax and use this. May 18, 2003. #3 of 6.
What is rg59 coaxial cable used for? - AskingLot.com
https://askinglot.com/what-is-rg59-coaxial-cable-used-for
What is rg59 coaxial cable used for? RG-59/U is a specific type of coaxial cable, often used for low-power video and RF signal connections. The cable has a characteristic impedance of 75 ohms, and a capacitance of around 20pF/ft (60pF/m). The 75 ohm impedance matches a dipole antenna in free space. Click to see full answer.
RG59 vs RG6 for line level audio : CommercialAV
https://www.reddit.com/r/CommercialAV/comments/4bw488/rg59_vs_rg6_for_line_level_audio/
Mutual capacitance: 16.2 pF/FT | 53.14 pF/M. So, with the quad shielding, thicker conductor, and lower resistance, it should give me a better chance at getting a cleaner signal to the headend. Not to mention cost to much, but the RG6 is less than half the specialty RG59. For audio you can use almost any cable.
Once again...RG6 vs RG59/u - Audioholics Home Theater …
https://forums.audioholics.com/forums/threads/once-again-rg6-vs-rg59-u.36608/
RG59 is fine for LF analog connections (component video etc...); it's thinner and a bit easier to work with in a cramped cabinet, but it's not intended for HF digital transmissions. It's probably cheaper and simpler to just buy generic RG6 at Home Depot and use it for all of your coax needs. mtrycrafts Audioholic Slumlord Oct 20, 2007 #8
Using a 75 ohm RCA video cable for as an analog audio ...
https://www.audiosciencereview.com/forum/index.php?threads/using-a-75-ohm-rca-video-cable-for-as-an-analog-audio-cable.8349/
Yes, this is no problem. Having a single conductor wire is no problem at audio frequencies. Actually I use 75 Ohm RG-59 as my own standard for RCA cables. The advantage is that you can use those cables for both analog and digital (SPDIF coax) audio connections.
Can I use an RG59 cable for an oscilloscope? - Quora
https://www.quora.com/Can-I-use-an-RG59-cable-for-an-oscilloscope
For non-critical use at low frequencies, yes. The input of an oscilloscope is usually 1 M impedance, with better scopes having a 50 ohm impedance as a selectable option. RG59 cable has a 75 ohm characteristic impedance, so you will get some mismatch/reflections at higher frequencies when using with a 50 ohm scope. 51 views Answer requested by
Audiogon Discussion Forum
https://forum.audiogon.com/discussions/best-rg6-rca-compression-connectors-for-subwoofer-cable
Actually, a lot of audiophiles use RG59 for subwoofer cable, and R6 solid copper is an improvement over that. Blue Jeans cable makes them using the method I intend to use. This is a powered subwoofer mind you, so the signal going to the subwoofer is DIGITAL Line Out, for which RG is perfect for long runs and maintains constant 75 ohm impedance.
Rg6 coax cable for RCA use? - Techtalk Speaker Building ...
https://techtalk.parts-express.com/forum/tech-talk-forum/48722-rg6-coax-cable-for-rca-use
How do you guys feel about using standard tri shield coax as an RCA audio substitute in a automotive setting. I have access to silver clad ultra heavy shielded coax cable. ( I work for Comcast) and this stuff has 6 layers of shielding. Would I be able to use this in a auto setting to connect amps as opposed to the usual twisted RCA connections.
Using 75 ohm digital cables for analogue audio - 2 Channel ...
https://www.hifiwigwam.com/forum/topic/36030-using-75-ohm-digital-cables-for-analogue-audio/
Balanced audio, whether analogue or digital use 110 ohm twisted pair cable. All my home-made unbalanced interconnects whether for analogue or digital are made with RG59 cable as it gives very good screening and terminates easily. RG6 is ever better screened, but that bit stiffer, so I use RG59.
Now you know Using Rg59 For Audio
Now that you know Using Rg59 For Audio, we suggest that you familiarize yourself with information on similar questions.
