We have collected the most relevant information on Wd Tv Dts Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
Play MKV with DTS Audio on WD TV Media Player - Pavtube
http://www.pavtube.com/mkv-audio-playback-solutions-on-wd-tv.html
Step 1: Add MKV files with DTS audio codec to the program. Run the program on your computer click "File" to load MKV file with DTS audio codec. Step 2: Pick output file format. Click the "Format" bar, from its drop-down list, choose one of WD TV media player accepted video format such as "HD Video" > "H.264 HD Video(*.mp4)" from "Format" bar drop-down list. Step 3: Select …
WD TV Live & DTS-HD Master Audio? - WD TV Live Firmware ...
https://community.wd.com/t/wd-tv-live-dts-hd-master-audio/46438
It’s definitely not for DTS-HD because WD will never support it for the current Live range (Live, Plus and Hub). Hopefully WD do fix multichannel PCM (5.1 and 7.1), so that people with DTS-HD files can transcode the audio stream to PCM and play files with HD audio that way. Marde October 15, 2015, 3:26am #6
Play MKV AC3 5.1/DTS 5.1 audio with WD TV players- BD/DVD ...
http://www.pavtube.com/guide/mkv-audio-playback-solutions-wd-tv.html
To enjoy surround sound, you need to connect your WD TV box to A/V receiver via S/PDIF port (using an optical cable) or HDMI output, and set “Digital” audio output using remote control following these steps: 1) Press Home, then select the “Settings” icon. 2) Press down arrow and select “Audio/Video” category, and then press Enter.
Dts hd master audio support When? - WD TV Live & Live Plus ...
https://community.wd.com/t/dts-hd-master-audio-support-when/33695
Audio – MP3, WMA, MPA, M4A, MP4A, OGG, WAV/PCM/LPCM, AAC, FLAC, Dolby Digital, AIF/AIFF, MKA An audio receiver is required for surround sound output (including the unsupported DTS audio codec). For more information see Answer ID 3590: DTS support on the WD TV Media Player AAC/Dolby Digital decodes in 2 channel output only.
DTS-HD audio Yes/No - WD TV Live Hub Discussions - WD ...
https://community.wd.com/t/dts-hd-audio-yes-no/60693
Before anyone flames me, I HAVE read this forum for a clear answer. Can anyone test and confirm for certain if HD audio (DTS-HD specifically) is passed through the Hub to a capable receiver when connected over HDMI and the audio setting is set to passthough mode. Ideally within a MKV container AND/OR a .ts / .m2ts file… Other posts seem to indicate that Dolby-HD IS supported …
DTS Sound problem - WD TV Live & Live Plus - WD Community
https://community.wd.com/t/dts-sound-problem/31322
If the file has DTS audio and you’re plugging directly into your TV (no external surround audio receiver), you’ll need to set the audio output to Stereo. If audio output is set to Digital, the TV will receive the compressed DTS signal and will not be able to decode it.
No DTS sound for mkv files? - WD TV Live & Live Plus - WD ...
https://community.wd.com/t/no-dts-sound-for-mkv-files/31493
Go to the audio options and choose DTS passthrough on the audio track (just the first DTS track). Try playing THIS file. If it plays fine (and I suspect it will) then the problem is your file and not your Live or receiver. (Handbrake is the gold standard of compatibility). NuminelJune 29, 2010, 7:42pm #16
DTS-HD Master audio capability - WD TV Live Hub ...
https://community.wd.com/t/dts-hd-master-audio-capability/63954
DTS-HD Master audio capability. So I have both the Xtreamer prodigy black and the WD TV live latest model. I have them both connected to my Denon AVR-3310CI. When I select bitstream through HDMI on the prodigy it will display as DTS-HD Master for my 1080p blurays with DTS-HD Master audio and the HD Audio light will come on. When i select digital passthrough via HDMI …
Playing AC3 and DTS Audio Files impossible on new ... - WD
https://community.wd.com/t/playing-ac3-and-dts-audio-files-impossible-on-new-wdtv-live/82667
I have been using the previous WD TV Live for many years for watching videos, pictures and mainly for listening to my AC3 Audio Files (Dolby 5.1) and DTS Audio Files (also 5.1). located on my NAS in a special folder under /Music, next to my MP3 music. Output is set to the SPDIF interface. All worked perfectly well for years.
WD TV HD Media Player – no sound? | Another Lost Soul's Blog
https://anotherlostsoul.wordpress.com/2009/05/30/wd-tv-hd-media-player-no-sound/
There are currently two solutions. One is to output the DTS over optical. This requires an amp or 5.1 surround sound system supporting DTS. The second solution is to convert the DTS soundtrack to Dolby Digital 5.1 (AC3). By doing this, the WD TV will downmix this to stereo over HDMI. How do you do this? Use PopCorn MKV AudioConverter by Heartwave.
Now you know Wd Tv Dts Audio
Now that you know Wd Tv Dts Audio, we suggest that you familiarize yourself with information on similar questions.
