We have collected the most relevant information on Wsjt No Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.


[email protected] | No audio in

    https://wsjtx.groups.io/g/main/topic/74580032
    My initial thought was a Windows audio issue so here is what I have checked: 1. WSJT-X is set to receive audio on the USB CODEC, he has only one. 2. Opening the Windows audio panel audio from the radio can be seen driving theUSB input level indicator. 3.

[email protected] | No output from WSJT-X

    https://groups.io/g/FT8-Digital-Mode/topic/no_output_from_wsjt_x/29630957?20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,29630957
    The rig will key but you wont have any TX output because you dont have any sound. Check your settings and make sure you have the right sound card codec in WSJT-X I just helped a guy this AM that for some reason messed with his settings and rendered the codec for his rig non operable . I finally found out how he did it and fixed it. Same thing.

Suddenly no more receive audio showing up in WSJT-X ...

    http://www.wsprnet.org/drupal/node/7679
    I have been using WSPR mode lately and everything was working fine, then suddenly yesterday while the program was running, no more audio being received by WSJT-X 1.8.0. Yes. Monitor is ON. No other changes to configurations. Sounds are properly mapped to the USB sound card I use. FLDIGI still listens fine so there is audio going into the PC.

WSJT / [wsjt-devel] No Audio Options in Dropdown

    https://sourceforge.net/p/wsjt/mailman/message/35187773/
    Hi, I'm getting a weird issue with a build of the latest dev version of WSJTX. Compiling and running work fine, but when it launches I get 4 popup audio warnings and there are no options available in the audio dropdowns. I'm used to the audio warnings when the devices aren't set properly, but it seems relevant. It looks to me like it can't ...

[email protected] | #txaudio #linux WSJT-X No TX audio ...

    https://wsjtx.groups.io/g/main/topic/txaudio_linux_wsjt_x_no_tx/85155189?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,85155189
    Both have fine cat control on Linux, with the active frequency showing in wsjtx. TX works fine but there's no audio output. The way audio is sent to the radio is by an external audio port on the computer. Alternatively a USB soundcard can be used for the same result of sending audio out. WSJTX has "default" set for both input and output audio.

WSJT-X Audio File Save Problem and Fix - VA3ROM

    http://www.va3rom.com/docs/WSJT-X%20Audio%20File%20Save%20Problem%20and%20Fix.pdf
    WSJT-X AUDIO FILE SAVE PROBLEM AND FIX 30 August 2018 by Robert C. Mazur, VA3ROM Updated 26 March 2019 Introduction Long story short, even though WSJT-X ˇs default menu ˝Save ˛ setting is ˝None ˛ (no audio *.wav format file recordings should be saved), this is not so.

WSJT-X with Icom 7300, no transmit audio : amateurradio

    https://www.reddit.com/r/amateurradio/comments/9af96e/wsjtx_with_icom_7300_no_transmit_audio/
    WSJT-X with Icom 7300, no transmit audio. I have spent hours and hours on this and I am stumped. I'm trying to use WSJT-X/FT8. I can receive just fine. But when I transmit, my audio "scope" is a flatline and I never get responses. I'm pretty sure that I'm not getting audio from the computer to the 7300.

WSJT-X stopped receiving | QRZ Forums

    https://forums.qrz.com/index.php?threads/wsjt-x-stopped-receiving.725422/
    One day WSJT-X worked, two days later it didn't. No waterfall, no decode. Checked Settings for General, Radio, Audio (had saved screenshots months ago). No RX even after changing settings to default per the user guide. However the sample wav files receive properly. TX still works too, evidenced by PSKreporter spots.

Setting up CAT/CI-V and Audio Drivers for WSJT-X

    https://www.n1fd.org/2018/11/26/wsjt-x-setup/
    Audio is not passed using the USB UART Bridge CAT/CI-V interface, it is strictly used for radio commands. WSJT-X uses a small set of messages over the CAT interface to control the radio. These include band changing, VFO frequency, PTT and a few others.

WSJT-X and JTAlert issue after Windows 10 update - YouTube

    https://www.youtube.com/watch?v=YYgtgz9f9E8
    How to fix audio issues in WSJT-X after the Windows 10 update.A lot of people, myself included have experienced the error, "Error in Sound Input" in WSJT-X w...

Now you know Wsjt No Audio

Now that you know Wsjt No Audio, we suggest that you familiarize yourself with information on similar questions.