We have collected the most relevant information on Xl1 Audio Inputs. Open the URLs, which are collected below, and you will find all the info you are interested in.
XL1 Audio Step by Step, Part Three provided by Canon USA
https://www.dvinfo.net/canon/articles/article70.php
Audio 1 Input for Two Channel Recording (Stereo 1) using the RCA jacks, where the sound sources are XLR type microphones attached via the MA-100 Microphone Adapter/Shoulder Pad which contains 2 XLR inputs (L and R). The MA-100 can be plugged into the AUDIO 1 RCA terminals on the back of the camcorder, or AUDIO 2 RCA terminals on the right side of the grip …
Maxell's Integrated Lecture Capture Solution
https://biz.maxell.com/en/display_equipment/img/MA-XL1_Brochure.pdf
Audio HDMI 4 (Stereo) Inputs Audio-in (3.5mm) 1 (Stereo) MIC-in (3.5mm) 1 (Mono) Phoenix Plug 1 × 6 1 (Stereo) Bluetooth RX *1 1 (Mono) Audio HDMI 1 (Stereo) Outputs Headset-out (3.5mm) 1 (Stereo) Audio-out (3.5mm) 1 (Stereo) Phoenix Plug 1 × 6 1 (Stereo) Bluetooth TX *1 1 (Mono) Ethernet WAN 1 LAN 3 USB Type-A 4 Type-B 2 Control CONTROL1 1
the CANON XL1 - Digital Journalist
http://digitaljournalist.org/issue9712/canonxl1review.htm
With the addition of the "pro mount," you also get two XLR inputs, the professional audio standard. The main rear connections are stereo input/output RCA inputs, along with a composite video input/output, and an S video input/output.
Canon XL1 Audio Options - Canon Cameras - Creative COW
https://creativecow.net/forums/thread/canon-xl1-audio-options/
Any audio source plugged into the RCA plugs of your XL1 should come through. When you cycled through the different channels using the audio monitor button on the XL1 you heard nothing at all? Whether the audio was too low or too high or not, you still should have heard something if you had everything set up right.
Canon XL1 Audio Set Up - Bournemouth University
https://media3.bournemouth.ac.uk/secure/boom/content/media/Canon_XL1_Audio_Set_Up.doc
Connect the mixer to the Canon XL1 by connecting the 5 pin XLR (mixer end) / 7pin XLR to the 2 phonos + 3.5mm mini jack adapter lead. Then plug the two phonos into the Audio 1 flip open panel and the 3.5mm stereo mini jack into the headphone socket. The headphone return will enable you to hear the auxiliary return through the SQN 3m.
XL1 - One Side Not Working – Turtle Beach
https://support.turtlebeach.com/hc/en-us/articles/219498207-XL1-One-Side-Not-Working
May 16, 2016 13:01. If you're only hearing sound from only one side of your XL1 headset: First, double-check the connections between the Xbox AV cable and the headset's analog audio inputs (white and red RCA plugs). There should be no loose connections.
Now you know Xl1 Audio Inputs
Now that you know Xl1 Audio Inputs, we suggest that you familiarize yourself with information on similar questions.
